Table of Contents
Advertisement
39
Other Hookups
(cont'd
With a (VCR to TV) Converter/Descrambler
Box
This is an alternative to the connection shown on page 38. It allows you to program an unattended recording of more than one
unscrambled channel and watch one channel while recording another.
Cable
Input
ANT.IN Jack
RF OUT Jack
I
Cable Converter
Box
Recording
One Channel/
Watching
Another
1
With the VCR in VCR position, use the CHANNEL
(Up/Down) buttons to select the channel you want to record.
2
Use the TV/VCR button to put the VCR in TV position.
3
Use the TV channel selector to put the TV on the same chan-
nel as the output channel of the cable converter box.
4
Select the channel you want to watch at the cable converter
box.
Playing a Tape
1
Use the TV/VCR button to put the VCR in VCR position.
2
Use the TV channel selector to put the TV on the same chan-
nel as the output channel of the cable converter box.
3
Put the cable converter box on the same channel as the VCR
CH3/CH4 switch.
i Use the CHANNEL
(Up/Down)
buttons
to select the chan-
nel being recorded,
even when programming
a timer
recording
or a one touch recording.
You cannot record scrambled
channels
with this connec-
tion.
VCR to Stereo TV Hookups
IN Jack
VIDEO (yellow) and
AUDIO (white)
OUT(put)
Jacks
Audio Cable
Back of TV
Audio and Video
Input Jacks
• A Y splitter audio cable (not sup-
plied) is used here to deliver audio
to the TV's left and right channels.
• Cables are not supplied.
• The TV must be set to accept line
input.
Please refer to your TV
owner's
manual.
• This hookup
will not give you
stereo sound.
To get stereo sound,
use the connections
on page six
and select channel
to be viewed at
the TV (with the VCR turned of39.
Advertisement
Table of Contents
