On-Screen Displays - Magnavox VRT344 Owner's Manual

11
On-Screen Displays .-
VCR Status Display Screen
Function
Button
Pressed Time
STOP 12:00AM
CHI0 -Channel
SLP M 1:23:45
1 L
Tape
Speed
Counter
and
Counter
Memory
• If the channel you select has no broad-
cast, the screen will become a solid blue
field. The screen will remain blue until
you select an active channel
• You may bring up the status display at
any time by pressing the STATUS button.
(The exception is when viewing a still
picture or a slow motion picture, or
when the FF/SEARCH or REW(ind)/
SEARCH button is pressed during play-
back.)
• Channel numbers (when tuned) are dis-
played as an overlay for a few seconds.
:: VCR Status Display
A status display, which includes the current time, channel, and other informa-
tion (see illustration of the status display at left), will appear when you press
the STATUS button or when certain function buttons are pressed. You can
choose when you want the status display to appear and for how long it will
appear.
ON SCREEN ON:
• Whenever you press a function button (STOP, FF, etc.), the status display
will appear for five seconds.
COUNTER ONLY:
• Whenever you press a function button (STOP, FF, etc.), the status display
will appear for five seconds. After five seconds, only the counter informa-
tion will remain on-screen. You must press the STATUS button to remove it.
ON SCREEN OFF:
• The status display will not appear when you press function buttons.
: To choose the status display mode:
Press the MENU button to bring up the main menu display.
Press the Number 2 button to select VCR SET UP.
.. SELECT PUSH NO. SHOW
: I INORIdALPI,.AY ON l
I
2 REPEAT PLAY l
: 1
3 ON SCREEN MODE [
• J 4 LANGUAGE |
:" I SGUIDEt_t.IANNELSI:-r I
** _ 6 GUIDECHANNELMAP )
_._O END PUSH MENU J
" Press the Number 3 button to select ON SCREEN MODE.
i //TO SELECT PUSH NO.SHOWN'_
• 1 ON SCREEN ON ON l
! 2 COUNTER ONLY |
• _
3 ON SCREEN OFF J
_ ENO P_SH ME.U J'
i4
:
Press the Number 1 button to select ON SCREEN ON, the Number 2 button to
i select COUNTER ONLY, or the Number 3 button to select ON SCREEN OFF.
i ON will appear beside the selected status display mode.