One Touch Recording - Magnavox VRT245AT Owner's Manual

18
One Touch Recording
eoo• • •oQo • o• • •• o• i• • • ••• •e o•• • •• oo• • o• 11 •l• • • °Q• e• ••1•• oG Jl •• •• •• •• •• • o• •• • •• •• o• ••l •• •lo• o• •e o• ol • • •Q• ••• • oeoeoooo •• •••eQl•••ooi••
: Remote Control
The one touch recording (OTR) function
allows you to program an immediate timed
recording 30 minutes to four hours long
without setting the timer. Before you
begin, make sure:
Channels have been programmed.
The desired recording speed (SP, SLP)
has been selected with the (Tape)
SPEED button.
There is a tape in the VCR (make sure
the tape's record tab is intact and the
tape is long enough to record the pro-
gram(s).
The VCR is in VCR position.
Starting an OTR
Use the CHANNEL (Up/Down) buttons or
Number buttons to select the channel you
want to record.
Press the OTR button. The screen below
will appear.
LENGTH 0:00
Press the QTR button until the desired
recording length (30 minutes to four hours)
is in the upper left comer of the screen.
Recording will begin immediately.
~..
Use the CHAN-
NEL (Up/Down)
buttons or
Number buttons
to select the chan-
nel you want to
record.
Press the OTR
button to start an
OTR and select a
recording length.
NOTES
To check the time remaining for an OTR after the OTR has been set. press
the STATUS button.
To change the recording length while an OTR is in progress, press the OTR
button until the desired length is displayed on-screen.
If you begin an OTR when a recording is paused, the OTR will begin.
You can pause an OTR by pressing the PAUSE button. PAUSE will not
appear on-screen. The OTR time will continue to count down in the PAUSE
mode.
If the preset time for a timer recording comes up during an OTR. the OTR
has priority.
To cancel an OTR, press the OTR button to bring up the OTR display. Then
press the CLEAR button on the remote control 07"the STOP/EJECT button
on the VCR. OTR CANCELLED will appear on-screen briefly.