Table of Contents
Advertisement
12
Remote Control Buttons
TV PRESET Button
Use to program the remote control to operate your TV. Details are on page 34.
VCR/TV
Switch
Slide to VCR position
before
using the VCR controls;
slide to TV position
before using the TV controls
(see shaded box on page 13).
POWER
Button
Press to turn the VCR on or off.
TV/VCR Button
Use to select the signal source that your TV receives.
TV Position
Use to watch TV or to watch one program while recording another.
Details are on page 17.
VCR Position
Use to watch a tape, monitor a recording, or watch a TV broadcast using
the CHANNEL (Up/Down) or Number buttons.
PLAY(X2) Button
Press to play a tape. Also, press to release Search, Still mode or Slow mode and
return to normal playback (see page 32for details). [
_J
REW(ind)/Search
Button
When in Stop mode, press to rewind the tape at high speed. When in Play mode,
press to rewind while the picture stays on-screen.
PAUSE Button
In Record mode, press to temporarily stop the recording (pause). In Play
mode, press to freeze the picture (still) (see page 32for details).
TIME (Search) Button I
Allows you to skip backward or forward on a tape a specified amount of time.
Details are on page 30.
MENU Button
Press to bring up the main menu display.
Number
Buttons
Use to select channels
and on-screen
menus,
and to program
VCR functions
(such as setting
the clock).
Channels
1 - 9
To select, press 0, then press the channel
you want to select.
For example,
to select channel
7, press 0, 7.
Channels
100 and above
-
To select, press the 100 button,
then press the last two digits of the channel
you want to select.
For example,
to select channel
! 17, press 100, l, 7.
TIME
CHANNEl
SKIP
VCRPlus+
CD
SLOW Button
Press during playback to see a recording in slow motion.
MENU
CLEAR
STATUS
CZ)
®
®
®
®
®
®
@ ®
(Tape) SPEED Button
Press to select a recording speed (SP or SLP).
Advertisement
Table of Contents
