More
Auto
Drg
Coo!
DPU
Less
WRINKLE-FREE
Auto
DPU
Dow. Off
Dry
Less
FABRICS
REGULAR
Drg
20
FABRICS
Off
•
Cool
Down
IO
Touch Up
Damp
PUSH TO START
Time Dry
This cycle can be used to regulate the drying time. Use
with Air Fluff, Delicate or Regular temperature
settings.
For timed drying, turn the control dial clockwise
until
the pointer points to the proper time setting in the
Time Dry cycle.
Note
• Using the Air Fluff temperature
setting will require
a longer drying time.
Special
Options
Cselect models)
Damp Dry is located on the Time Dry section of the
dial. It is designed to partially dry items and can be
used with any temperature
selection. Damp Dry will
provide 20 minutes of tumbling
time, followed
by
five minutes of cool-down
tumbling.
Touch Up will release wrinkles
from items that are
clean and dry but only slightly wrinkled,
such as from a
crowded closet or suitcase, or from sitting in the dryer
too long after the cycle has ended. Touch Up provides
10 minutes of tumbling
followed by five minutes of
cool-down
tumbling
and can be used with any
temperature
selection.
Push the Control Dial in to
Start
Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.
Note
• The dial can be turned
in either direction to select
a cycle. Once started, the dial will not advance at
a specific rate during the Auto Dry cycles. At first
the dial may not advance at all. Toward the end of
the cycle (when the load begins to dry), the dial
will advance at a more regular rate and much
more quickly. This is normal operation.
Need help?
Do you have a question about the CYE3004AZW and is the answer not in the manual?
Questions and answers