Advertisement
Antenna/Cable Connections
For best reception
of broadcast VHF/UHF channels, a
good outdoor antenna is recommended.
With different
antenna lead-in
wires, use of one of the
adapters listed
below may be necessary,
Twin Lead (300 ohm)
1. Attach twin lead wires to screws on the adapter.
2. Push end of adapter
onto UHF/VHF input on the
set.
Coaxial Cable (75 ohm)
1. Attach connector
end of cable directly
to UHF/VHF
input on the set.
300-75
OHM
ADAPTER
TWIN
LEAD-IN
FROM
ANTENNA
A-I-rAC
H TO
ADAPTER
Connect only one antenna twin lead-tn to this adapter
REAR OF TV
UHF/VHF
75_
ANT/CABLE
COAXIAL
LEAD-IN
FROM
EITHER
A VHFt
UHF
COMBINATION
ANTENNA
OR CABLE
TV SERVICE
For cATV Cable, follow the 75 ohm Coaxial cable
connections
and see CABLE/NORMAL
TUNING in
_il
[3
Premium
or Pay Cable channels
use scrambled
signals and will require a converter
box (provided
by the cable company)
in addition to the normal
cable connections.
With Converter/Descrambler
Box
1.
Attach cable from the converter
to the UHF/VHF input
on the set.
2.
Set TV to channel output of the converter
(check
back of the converter).
3,
Make channel
selections with the converter,
REAR OF TV
ANT/CABLE
CABLE TV
CONVERTER
¢H3
BOX
OH 4
Advertisement
