Advertisement
,_dJUStmuili. ot the levels must be done while the illustration shown above is still on the
screen. Refer to the control chart below.
CONTROL BUTI'ONS
CONTROL LEVELS
-
+
CONTRAST
I To adjustpicturecontrast
Deeper
Lighter
BRIGHTNESS i To adjustpicturebrightness
Darker
Brighter
COLOR
To adjustcolorintensity
Deeper
Lighter
TINT
To adjustflesh tone tints
Purplish
Greenish
SHARPNESS
To adjustpicturefocus
Softer
Sharper
AUTO PICTURE CONTROL
When the RESET ON is selected, your TV will show in the factory preset picture level.
[]
Press the APC button, and the on-screen will appear.
}
PICTURE RESET
[]
Press the APC button to select the "ON" or "OFF" mode.
I
ON
NOTE : In the RESET ON mode, if you adjust the picture levels of the screen manually,
the RESET ON will be changed to RESET OFF automatically.
SETTING
THE SLEEP TIMER
The sleep time lets you watch TV for a specified length of time before shutting itself OFF.
Pressing the SLEEP button repeatedly will count down from a maximum of 240 minutes
in 30 and 10 minute intervals.
I
l
.....
]
_
.................
1_ I
If you don't press the SLEEP button within 3 seconds when a SLEEP time is displayed
on the screen, the television will be set to that SLEEP time.
To check the sleep timer setting, press the SLEEP button.
SLEEP 60
After 3 seconds
screen returns to
regular picture
The remaining
SLEEP time Js shown
You can adjust SLEEP time again while the SLEEP time is still on-screen.
12
Advertisement
