LG WM3431H Series Owner's Manual page 22

!i!i!i!i!i!i!i!i!i!i!i!! i iiiilililililili!iill !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
• Water supply is not adequate in
area.
• Water supply taps are not
completely open.
• Water inlet hose is bent.
• The filter of the inlet hose clogged.
• Drain hose is bent
or clogged.
• The drain filter is clogged.
• Load is too small.
• Load is out of balance.
• The appliance has an imbalance
detection and correction system. If
individual heavy articles are loaded
(bath mat, bath robe, etc.) and the
imbalance is too great, after several
attempts to restart the spin cycle the
machine will stop and the error code
will be displayed.
Check another tap in the house.
Fully open tap.
Straighten hose.
Check the filter of the inlet hose.
Clean and straighten the drain
hose.
Clean the drain filter.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper
spinning.
• Is the door opened or not completely Close the door completely.
closed? • If '_E " is not released, call for
service.
Unplug the power plug and call for
service.
• The water overfills due to the faulty
water valve.
• The water level sensor malfunction.
• Overload in motor.
• Overload in motor.
• Check water supply.
Close the water tap.
Unplug the power plug.
Call for service.
Turn the tap on
_lf" _-"
• " rl_ L- is not released,
unplug power plug and call
service.