LG LRTN19320 User Manual page 19

CRISPER COVER WITH LATTICE ON INNER
To remove the crisper cover:
i. Remove both crisper drawers.
2, While holding the crisper _ver support (2), pull the cover
up and out (1).
DOOR BINS
The door racks may be removed for easier cleaning
Snap_n Door Bins
To remove the bins:
1. Remove all items in the door bins.
2. Push the rack away from the inside wall of the door (A)
and lift up the door bin (B)
WARNING: Be careful when handing glass cover since
glass is not attached to cover
To remove lattice on inner surface
To replace the racks:
1. Hold either end of the door bin against the inside wa]I
of the door.
2, Push down the door bin end until it locks in piace.
DESIGN-A-DOOR
1, Design-A-Door bin can be moved side to side by sliding
right or left.
1,Removecdspercover(asillustratedabove)
2.Holdtheg]asscoverandovertumcrispercover
3,.Foreachlatticeholdlatticeand pullsidesofthecover
outwardtoremovela_ice,
2, To remove the Design-A-Door bin, lift up from the bottom of
the bin undicks and pull straight out.
WARNING: Be sure that the design-A-Door bins have clicked
into place. Otherwise, the bins may fall
NOTE: Do not adjust a bin that is loaded with food
3. To replace the bin, slide it in above the desired
Support slot and_ push down until it locks in place
To replace lattice on
1F oreachlatticeinsertmiddletabinl
(closesttoglasscover) andpullsideso_hecoverto
insertlatt[ce,
_. Make sure that if all bins are correctly assembled so that
they don't fall out of door,
(e)
Warning: Somebody can be hurt if Design-A-Door bins are not
firmly assembled.
NOTE: Do no;: adjust a bin that is ]oaded with food.
19