Proper Disposal Of Your Old Wine Cellar; Installation Requirements; Tools And Parts; Custom Overlay Frame - KitchenAid KUWA244PSS00 Use & Care Manual

IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury when using your wine cellar, follow these basic precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Remove doors from your old wine cellar.
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline,
away from wine cellar.
• Use two or more people to move and install wine cellar.
SAVE THESE INSTRUCTIONS
Proper Disposal of Your Old Wine Cellar
Before you throw away your old wine cellar:
• Take off the door.
• Leave the racks in place so that children may not easily climb
inside.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned wine cellars are still dangerous
- even if they will sit for "just a few days." If you are getting rid of
your old wine cellar, please follow these instructions to help
prevent accidents.
INSTALLATION REQUIREMENTS
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
• Hand drill or electric drill
(properly grounded)
• 7/e4"Drill bit
• 5/16"Drill bit
• Chamfer bit
• #16 Drill bit
• 7/e4"Allen wrench
• Phillips screwdriver
• Flat-blade screwdriver
• Scissors
• Masking tape
• Tape measure
• Petroleum jelly
PARTS NEEDED:
Custom Overlay Frame--See "Overlay Frame Dimensions."
Hardware (Optional)
PARTS SUPPLIED:
• Pivot plate (top) • #6 x 1/2"Flat-head
screws (2)
• 8 mm nylon insert (2)
• #6 x 1" Pan-head • 0.093 x 3/4"x 8 ft foam
screws (1O) tape
If you plan to install a custom overlay frame, you will need to
create the frame yourself or consult a qualified cabinetmaker or
carpenter. See "Overlay Frame Dimensions" for frame
specifications in creating your overlay frame.
IMPORTANT:
• The thickness of the overlay frame must be 3/4"(1.91 cm).
• Overlay frame must not weigh more than 20 Ibs. (9.07 kg).
• Overlay frames weighing more than recommended may
cause damage to your wine cellar.
• Before creating the custom overlay frame, determine the
direction you want the door to swing. Custom overlay
frames are hinge specific. A frame that is created for a
right-hinge door swing cannot be used for a left-hinge
door swing.