Dialling Shortcuts - Nokia 9000i communicator User Manual

Chapter 13 - Phone interface
Once the desired character is on the display
and you want to enter a new character, do ei-
ther of the following:
If the next required character is located on
some key other than the previously pressed
key, press the new key and the first character
on the key will appear.
If the next required character is located on
the same key as the present one, wait one
second. The vertical cursor will appear to the
right of the character just pressed. Alterna-
tively: press and select the character
without waiting for the cursor to appear.
Note: In the alpha mode, the numeric characters
available for each key are only for use with
names. You cannot use the characters as
ordinary phone numbers.
Storing information via the
phone interface
To store names and phone numbers via the phone
interface (to enter other contact information,
use the Contacts application):
Press Memory.
Key in the name (of up to 30 characters) that
you want to store with the phone number. For
details, see "Using memory: Keying in a name"
on page 13-4.
Press Save.
Key in the international access and country
codes (if necessary), area code and phone
number. Instead of the country-specific inter-
national access code, you can use the + char-
acter (press twice). When the + character
is used, the cellular network will automatical-
ly add the international access code of the
country from which you are trying to call.
If you are storing DTMF sequences and want
to use the DTMF special characters, for a
pause, press three times quickly, so that a
p is displayed. For a wait character, press
four times quickly, so that a w is displayed.
For more information on storing DTMF se-
quences, see chapter 3 "Contacts: Contact
cards - Storing DTMF tones" on page 3-3.
Press Save. The message SAVED will appear
(in the middle of the display). The entry will be
automatically saved in the Contacts directory
in alphabetical order (numbers will precede
letters).
See also chapter 3 "Contacts: Contacts directory
and the phone interface" on page 3-4.
A quick way to save text or numbers on the dis-
play is to press Memory for three seconds.
Recalling information
You may fetch phone numbers and names from
memory by the name with which the required
phone number was stored or by the speed dial
number of the Contacts directory entry.
To recall a phone number by corresponding name:
Press Memory.
Key in the name or its first letter(s).
Press Find. The name closest to the keyed in
characters will appear.
You can move to the next name containing
the same characters by pressing Next, or
scroll through the names with
you reach the correct one.
To review the phone number stored with the name:
Press . If the phone number has been
designated a speed dial number, the location
number of the name and phone number is
shown in the upper right corner of the display.

Dialling shortcuts

The dialling shortcuts provide quick and conven-
ient ways to make voice calls.
Speed dialling
Speed dialling is a handy way to call fre-
quently-used phone numbers by keying one
digit and the key. You can define up to
eight speed dial numbers in the communica-
tor memory ("B" memory). For information on
how to assign phone number speed dials, see
1998 Nokia Mobile Phones. All Rights Reserved.
13-5
or until