Panasonic QE-QL201 Instruction Manual

Safety precautions

Instruction Manual
Do not let water or other
liquid get in or contact with
the product.
Mobile Backup Power
Doing so may cause
QE-QL201
No wet
Model No.
Do not insert a metal object
Mobile Backup Power (5400)
to the terminal.
Doing so may
cause excessive
(E.g., QE-QL201)
QE-QL101
Give enough instructions
Model No.
to children for correct use
Mobile Backup Power (2700)
when necessary.
Failure to do so may cause
electric shock or personal injury.
Regularly clean dust on the
AC adapter.
Dust on the plug may cause
Thank you for purchasing the Panasonic product.
Read the instruction manual carefully for safe use.
Before use, read "Safety precautions" (pages 1 and 2).
Do not use the product in
the ambient temperature
outside 0°C to 35°C.
QE-QL101TMTR
Doing so may cause
S0512-0
leakage, excessive heat or
explosion of the battery.
Safety precautions
Be sure to follow the instructions
Do not expose the product
The symbols below are used to explain the precautions to to direct sunlight or high
temperature.
prevent risk of people and damage of property.
Doing so may cause
The symbols below indicate the levels of risk and dam-
excessive heat, explosion
age resulting from wrong operation.
This symbol indicates the high risk of death
Danger
or serious injury. Disconnect the USB cable
and AC adapter from the USB
This symbol indicates the risk of death or
Warning terminal and outlet when not
serious injury.
using the product.
This symbol indicates the risk of minor injury
Caution Failure to do so may cause
or property damage.
electric shock.
The symbols below indicate the contents of instructions
you are requested to observe. Do not charge using a
vehicle power port.
(The symbols below are examples.)
You must not do the action described with
electric shock.
this symbol.
You must do the action described with this
symbol.
Precautions for use
Danger
Do not overcharge the fully charged Mobile Backup Power. Charge
after using it. Even if the Mobile Backup Power has been fully charged,
Do not disassemble or Do not charge other the optical indicator lights several seconds when it is recharged.
devices while the product is
modify the product. If noise interferes with the radio or TV, distance the Mobile Backup
contacting with your body Power 1 m or more.
Doing so may cause
(e.g., in a pocket). It is normal that the Mobile Backup Power gets warm during use or charge.
electric shock. It is normal that a small buzzing sound is heard during use or charge.
Doing so may result in burn
It is normal that the charge indicator of some devices to be used
in case of heat generation.
and that of the Mobile Backup Power do not go off at the same
time. Charging is completed when the charge indicator of the
Do not put the product in Charge via a USB type A
device to be used goes off.
output terminal of a computer
The device to be used may not be fully charged depending on the
use or store the product at or other devices or using the
battery capacities of the device and the Mobile Backup Power.
high temperature. included AC adapter.
The charge indicators of the Mobile Backup Power and the device
Doing so may cause Failure to do so may cause
to be used go off also when the Mobile Backup Power runs out of
excessive heat, explosion or
battery.
shock or injury.
E-1
QE-QL201
QE-QL101
T-1
Precautions for use
Be sure to follow the instructions
It is possible to use a mobile phone or other device while it is
Warning
charged by the Mobile Backup Power. In that case, the remaining
battery may become low because the battery of the mobile phone
or other device is not charged.
Do not connect or disconnect
The Mobile Backup Power cannot be charged during supplying power.
the USB cable and AC
adapter with wet hand.
long time, be sure to charge it before use.
Avoid storing the product with its battery fully charged or empty.
Otherwise performance and lifetime of the battery may be degraded.
or electric shock.
Use the genuine AC adapter to charge from a household outlet. Using
No wet hand
Insert the USB cable and AC
Accessories
adapter completely to the
end.
Incomplete insertion may
Instruction Manual
Mobile Backup Power
QE-QL201
Model No.
Mobile Backup Power (5400)
QE-QL101
Model No.
Mobile Backup Power (2700)
Do not charge using a
transformer such as a travel
USB cable
Thank you for purchasing the Panasonic product.
converter. Read the instruction manual carefully for safe use.
Before use, read "Safety precautions" (pages 1 and 2).
(Approx. 30 cm)
QE-QL101TM
S0512-0
Doing so may cause excessive
Instruction Manual
Do not damage the AC
adapter.
Using the damaged AC
AC adapter (QE-AP104CA)
electric shock.
Features
Caution Power Supply for electronic devices
2-way charge, AC & USB
Battery Indicator with 3 colors
Avoid much humidity or
dust when using or storing
Part names
the product.
Failure to do so may cause
<QE-QL201>
Do not put something on
Optical indicator
the product. Do not put the
Lights during charging and outputting
product on an unstable place.
Doing so may cause
shock or personal injury.
USB type micro-B input terminal (DC IN)
Do not use the product if the
USB cable or AC adapter is
damaged, or the USB terminal
DC output button (indicates battery level)
or outlet is loose.
Turns on/off DC output.
If pressed with no device connected, the
electric shock.
remaining battery level is displayed for
USB type A output terminal (x2) (DC OUT)
<QE-QL101>
DC output button (indicates battery level)
Turns on/off DC output.
If pressed with no device connected, the
remaining battery level is displayed for
USB type A output terminal (DC OUT)
Optical indicator
Lights during charging and outputting
USB type micro-B input terminal (DC IN)
E-2 E-3
QE-QL201
4 5 ( 0 0 A m ) h
QE-QL101
7 2 ( 0 0 A m ) h
( 1 ) 2
T-2 T-3
How to use
The illustrations show QE-QL201 as an example.
How to charge the Mobile Backup Power

How to supply power to a device

To charge from a computer
Press
3
2
3
4 1
1. 1.
Connect the USB type micro-B plug of the Connect the USB type micro-B plug to the terminal
included USB cable to the USB type micro-B input of the device to be used.
terminal of the Mobile Backup Power.
The included USB cable can be used for a device with a USB
type micro-B charging terminal. If the dedicated cable is included
2.
Connect the USB type A plug of the included USB
with the device to be used, use it for charging.
cable to the USB termainal of an active computer
2.
Connect the USB type A plug to the USB type A
to start charging.
output terminal of the Mobile Backup Power.
3.
Press the DC output button.
on page 5).
(Note)
Output is done normally when the optical indicator is on (see
Do not connect other devices to the other USB type A output
terminals of the computer during charging.
4.
When supplying power ends, press the DC output
3.
The optical indicator goes off when charging is
button to turn off.
completed.
The optical indicator goes off.
Estimated charging time:
(Note)
<QE-QL201> Approx. 14 hours Before use, check compatibility of the device in its instruction manual.
<QE-QL101> Approx. 7 hours
It may not work suitably depending on the types.
4.
The total output current of the product is 1.5 A. Simultaneous use of
Disconnect the included USB cable after charging
is completed.
(when using QE-QL201).
Some of the devices which communicate with a computer during
being powered via the USB cable may not be used.
The Mobile Backup Power cannot be charged during supplying power.
To charge from a household outlet
Optical indicator
3
<Charging>
Indication Color
Red
On Orange
4 1
Green
2
(Approx. 0.5 Red
sec. intervals)
Off * -
*
1. <Outputting>
Connect the USB type micro-B plug of the
included AC adapter to the USB type micro-B input Indication Color
terminal of the Mobile Backup Power.
Green
2.
Connect the power plug of the included AC
On Orange
adapter to the outlet to start charging.
The optical indicator is on during charging
Red
3.
The optical indicator goes off when charging is
Off * -
completed.
Estimated charging time:
<Indicating battery level>
<QE-QL201> Approx. 7 hours
<QE-QL101> Approx. 3.5 hours
Indication Color
4.
After charging is completed, remove the included
Green
AC adapter in the reverse procedure.
On Orange
Red
E-4
3
2
3
4 1
1. 1.
2.
2.
3.
3.
4.
4.
3
4 1
2
1.
-
2.
3.
4.
T-4
Troubleshooting
Check the items of the table below.
Symptoms Causes Corrective actions
The computer is not on. Start the computer.
Optical indicator The computer is in standby
Exit standby mode. (*1)
mode.
USB type Other devices are connected
Do not connect other
A output to the computer's other USB
devices to the computer's
terminals, resulting in an
terminal
other USB terminals.
electric shortage.
Cannot charge
The USB cable used is not Use the included USB
2 (via computer)
applicable. cable.
The connection terminal
is dirty or deformed Replace the USB cable.
(connection failure).
1
The Mobile Backup Power
Charge after supplying
is supplying power to a
power ends.
device.
The included AC adapter is Use the included AC
not used. adapter.
The power plug of AC Connect the power plug
adapter or the USB plug is and USB plug completely
not connected completely. to the end.
Cannot charge
(via AC adapter) The connection terminal
is dirty or deformed Replace the AC adapter.
(connection failure).
The Mobile Backup Power
Charge after supplying
is supplying power to a
power ends.
device.
It gets warm while a
It is not a failure. Charge
The Mobile Backup connected device is used
after the Mobile Backup
Power gets warm or during and just after
Power has become cool.
charging.
Noise interference A radio or TV is in nearby Keep 1 m or more distance
with TV and radio area of the product. when charging.
High or low ambient
temperature results in Charge within 0°C to 35°C.
longer charging time.
The computer has entered
standby mode during
Exit standby mode. (*1)
Charging takes charging via the USB
long (compared terminal.
charging time) Other devices are connected
Connect the product directly to
to the USB terminals of
the USB terminal of charging
charging device such as a
State Remaining battery
computer.
computer, or the product is
Do not connect other devices
Charging Approx. 30% or less
connected via a USB hub or
to the same computer.
any other connection cable
Charging Approx. 30 to 60%
Use the included USB cable.
than included USB cable.
Charging Approx. 60% or more
Use a compatible USB
The USB cable used is not cable with the device to be
Failure -
applicable. used (see the instruction
manual of the device).
No output from
Charging complete 100%
the Mobile
Charge the Mobile Backup
Backup Power The battery is empty.
Power.
The DC output button was Press the DC output button
State Remaining battery
not pressed. before use.
DC output
Approx. 60 to 100%
Charge the Mobile Backup
(supplying power)
The battery is low.
Power.
Operation time
DC output
Approx. 30 to 60% of the Mobile
(supplying power) The battery is out of life if the
Backup Power is
operation time is considerably
DC output short. The battery is out of life.
Approx. 30% or less short even when it is fully
(supplying power)
charged. (*2)
No output
-
(*1) See the instruction manual of the computer to exit standby more.
(power supply is stopped)
(*2) The battery life depends on the use conditions. Note that the internal battery
cannot be replaced.
State Remaining battery
Usable (enough charged) Approx. 60 to 100%
Usable Approx. 30 to 60%
Needs charging Approx. 30% or less
E-5 E-6
2
1
T-5 T-6
Model QE-QL201 QE-QL101
Rated input DC 5.0 V 500 mA / 1 A
DC 5.0 V 1.5 A MAX
Rated output DC 5.0 V 1 A MAX
(Total of two USB outputs)
Dimensions* Approx. 62 x 70 x 22 mm Approx. 39 x 70 x 22 mm
Weight* Approx. 142 g Approx. 78 g
Operating
0°C to 35°C
temperature
Lithium ion battery 3.7 V, Lithium ion battery 3.7 V,
Internal battery
5400 mAh (20 Wh) 2700 mAh (10 Wh)
* Excluding Accesaries
<AC adapter>
Model QE-AP104CA
Rated input AC 100-240 V, 50-60 Hz, 10-16 VA
Rated output DC 5.0 V 1 A
Approx. 27 x 65 x 38 mm
Dimensions
(excluding projections and cables)
Weight Approx. 90 g
Power consumption Approx. 7.5 W
Standby
Approx. 0.2 W
consumption
Operating
0°C to 40°C
temperature
<Charging/outputting time (guide value)>
Model QE-QL201 QE-QL101
USB input Approx. 14 h Approx. 7 h
AC adapter
Approx. 7 h Approx. 3.5 h
input
1 terminal
Approx. 5 h Approx. 2.5 h
output
2 terminal
Approx. 2.5 h -
output
The charging time above is a guide value for charging the fully discharged
Mobile Backup Power to the full level.
It changes depending on the indicated battery level of the Mobile Backup
Power and the ambient temperature.
cable is used.
The outputting time above is a guide value of when the fully charged Mobile
Backup Power is output at DC 5.0 V, 500 mA.
E-7
T-7