Table of Contents
Advertisement
Contacts and Settings
7.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
8.
Use [
][
] to select "Yes" and press [Enter].
•
The contact list details screen is displayed.
9.
Press [Home].
•
The Home screen is displayed.
Deleting a Contact
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Contact List" and press
[Enter].
•
The contact list screen is displayed.
3.
Use [
][
] to select the contact you want to
delete.
•
You can use [
the remote control to select the displayed tab
(Page 35).
4.
Press [R].
•
A dialogue box to confirm the deletion is
displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The contact list screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
78
User Manual
][
] or the numeric buttons of
Registering a Contact from the
Call History
Registering a Single-party Contact
You can register a contact to the contact list from the
call history.
Note
•
If a host name is displayed in the "Site" column
of the call history, the party cannot be registered
in your contact list.
•
Also, you may not be able to register a SIP URI
(or SIP user name) from the incoming call
history to the contact list for a reason such as
non-compliance with the RFC. In this case,
contact your network administrator.
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Call History" and press
[Enter].
•
The outgoing call history screen is displayed.
Note
•
To refer to the incoming call history,
press [G].
3.
Use [
][
] to select the single-party entry you
want to add as a contact, and press [B].
•
The contact list registration screen is displayed.
Advertisement
Table of Contents
