5-2. Mode Settings
1) Port
Sets the communication port used for the touch panel connection.
If Auto Connect is selected, the driver software detects the port automatically to set. If the
automatic connection cannot be performed, select the communication port which is connected.
The default setting is "Auto Connect".
2) Click Mode
Selects the input mode for the touch panel. The relationship between the touch input and mouse
button pressing can be set. The default setting is "Drag".
Drag
1
Touching operation to the panel is set as pressing down (button down) of the left mouse button and
lifting the nger off the panel is set as releasing (button up) of the left mouse button.
Therefore when the nger is lifted off the panel, a click event occurs. When the nger is travelling,
the mouse cursor emulates the movement and drag operation can be performed.
Button down
14
Drag
Button up
Click event occurs