Advertisement
DR 050
• Whenever you have to turn the balance wheel, turn it toward you (coun
ter- clockwise as shown by black arrow).
• Make sure stop motion knob on the balance wheel is tightened before
you begin sewing.
• Never run a threaded machine unless you have fabric under the sewing
foot.
• Place both threads back under the sewing foot before you put fabric
into the machine.
• The machine will feed the material under the sewing foot automatically.
All you have to do is guide the work.
• Always bring take-up lever to its highest position before you begin and
after you have completed a seam.
Failure to observe this rule may cause the thread to slip out of the
needle eye. Also, it is easier to remove the work with the take-up
lever up.
3
DRO51
Advertisement
