Pfaff Automatic 260 Instruction Book page 19

Before you begin, make sure that the needle
is
at its highest position,
.
e. that the lower hole of the
ascending takeup lever d is in line with the bottom edge ot the top cover. Now lower the sewing
toot and
—
With your left hand push needle threader control down until threader prong w (see opposite
page) penetrates needle eye. Keep control in this position.
Hold thread loosely and lead it from left around the small pin, then place
it
behind hook ot
threader prong.
Release control slightly until prong w reverses and pulls thread through needle eye.
Jerk control down again so the thread loop will fatI off the prong. Pull thread through needle
eye and release control.
R 7068
58008 1
I8013
2
158009 3 158010