Pfaff Automatic 260 Instruction Book page 17

Place spool of thread on spool pin 1 and lead thread end through holes
in thread guides 2 and 3
and through both thread retainer openings 4
(see illustration oppoite).
Lead thread clockwise around tension and pull it between any two of
the tension discs 5.
Bring takeup lever 7 as high as it will go and pass thread from right
to left through one of the holes at its end. Pull thread info slots at left
of thread guides 8 ond 9 and then into the slot ot left of needle clamp 10.
Then thread needle, front to back. The automatic needle threader will
do this for you easily and quickly.
16