Pfaff Automatic 260 Instruction Book page 12

Pull it through thread guide.
Pass end of thread through slot in bobbin, from inside.
Set bobbin on bobbin winder spindle so that key at base
of spindle enters slot in bobbin. Press in lever i.
Hold end of thread and slowly start machine. Having
wound a few turns, break off end of thread and continue
winding at a faster pace.
Bobbin winder will stop automatica lly when bobbin is
full.
If you don't want a full bobbin, press out lever i
when
sufficient amount of thread has been wound.
You may continue sewing while you are winding bobbin
without disconnect ing balance wheel.
R7100
4
6
7
R 7067
5
R7102
8
R 7099