Free Motion Sewing 2:12 - Pfaff selectline Owner's Manual

D
C
B
2:12
E
F
G
Free Motion Sewing
Insert the darning foot:
Loosen screw D. Set the needle at its
highest point and push the pin of the
darning foot fully into the hole C of the
sewing foot holder. When doing this,
the guide fork G should position itself
around the presser bar. The lever E must
be behind the fi xing screw F. Now tighten
screw D.
Free Motion Position:
Lower the presser foot lifter (A) while
pushing it lightly to the rear. This snaps
the presser foot lifter into a notch (B) on
A
the back side of the sewing machine into
the free motion position.
• Drop the feed dog.
• Select a straight stitch or a zigzag
stitch.
• Keep an even speed, manually move
your fabric.
Tip: For even stitches, move your fabric at
a smooth even fl ow. Move the fabric so the
stitching does not cross.
G - –
G - –
G - –
2-3 6
2-3 Optional
2-3 Optional