Threading The Needle 1:10 - Pfaff selectline Owner's Manual

Threading the needle thread
A
Switch off the main switch
B
Raise the presser foot lifter (19) and
F
turn the handwheel until the take-up
lever (9) has moved to the top. Place the
thread on the spool holder (8) and fi t the
corresponding spool cap.
Now, using both hands, pull the
thread into guide A and under thread
guide hook B. Pass the thread through
the lefthand threading slot C and
downwards. Pull the thread around stop
D into the righthand threading slot and
upwards E to the take-up lever F.
F
The thread must be pulled into the
take-up lever F from left to right and
downwards again in the right hand
threading slot. Floss the thread from the
side behind one of the two thread guides
H.
C
E
G
To thread the needle, stick the thread
from front to back through the needle eye.
To thread the needle using the needle
threader, please refer to the next page.
D
H
1:10
1:10