Pfaff 1245 Instruction Manual page 61

11 .05.04 Engagin g solenoid
Requirem ent
In needle rise position and with engaging solenoid 5 activated, there must be a distance
of 0.3 mm between engaging lever 2 and pawl
3.
0
1
Fig. 11
.
20
• Bring the machine to needle rise position by turning the handwheel.
• Loosen screw 1 until the engaging solenoid can be turned with difficulty.
• Manually activate engaging lever 2 so that pawl 3 engages.
• Press magneto inductor 4 as far as possible into solenoid housing 5 and move both the
solenoid housing and the magneto inductor in accordance with the requirem ent.
• In this position tighten screw 1.
11
-
23