User Controls; Control Panel & Remote Control; Control Panel - Optoma Projector with lens cap User Manual

Control Panel & Remote Control
There are two ways for you to control the functions:
Control Panel and Remote Control.

Control Panel

Using the Control Panel
POWER
MENU
RE-SYNC
SOURCE
Four Directional
Select Keys
Keystone
Lamp LED
Temp LED
Power LED Indicates the projector's status.

User Controls

Refer to the "Power On/Off the Projector" section on
pages 13-14.
Press "MENU" to launch the on-screen display
(OSD) menu. To exit OSD, Press "MENU" again.
Confi rm your item selection.
Automatically synchronize the projector to the input
source.
Press "SOURCE" to select an input signal.
Use to select items or make adjustments
to your selection.
Use to adjust image distortion caused
by tilting the projector. (
Indicates the projector's lamp status.
Indicates the projector's temperature status.
±40 degrees)
17