Trip Computer; Engine Oil Level - Opel Automobile Owner's Manual

72 Instruments and controls

Engine oil level

The oil level display is correct only if
the vehicle is parked on a level
surface with a cold engine.
The oil level message will only reset if
the ignition has been switched off for
more than 2 minutes.
If OIL message appears in the display
the oil level may need topping up. To
gain a more accurate indication of the
oil level, press and hold the reset
button. Engine oil level monitor 3 61.

Trip computer

The trip computer provides
information on driving data, which is
continually recorded and evaluated
electronically.
The functions can be selected by
pressing the button repeatedly on the
end of the wiper lever.
Press the button to select one of the
functions:
■ Fuel used
■ Average consumption
■ Instantaneous consumption
■ Range
■ Distance travelled
■ Average speed
Fuel used
Displays the amount of fuel
consumed since the last reset.
The measurement can be restarted at
any time by pressing the trip
computer reset button.
Average consumption
Average consumption is displayed,
taking into consideration the distance
travelled and the fuel used since the
last reset.
The measurement can be restarted at
any time.
Instantaneous consumption
The value is displayed after reaching
a speed of 25 km/h (15 mph).
Range
The range is calculated from the
current contents of the fuel tank and
the average consumption since the
last reset.