Reversing Light - Opel Automobile Owner's Manual

Reversing light

1. Remove 2 screws (using the tool
supplied) and remove lamp
assembly.
2. Twist bulb housing to separate
from lamp assembly.
3. Renew bulb.
4. Push to install the bulb holder into
the lamp assembly - then twist to
secure.
5. Install lamp assembly with
2 screws.
Number plate light
1. Remove 2 screws (arrowed) and
remove lens.
2. Renew bulb.
3. Re-install lens and replace
screws.
Vehicle care
Fog tail light
1. Remove 2 screws (using the tool
supplied) and remove lamp
assembly.
2. Twist bulb housing to separate
from lamp assembly.
3. Renew bulb.
4. Push to install the bulb holder into
the lamp assembly - then twist to
secure.
5. Install lamp assembly with
2 screws.
117