Table of Contents
Advertisement
Editing with sound file waveforms
Control guide
Save · · · · · · · · · · Save files edited in the <Sound File Waveforms> screen.
Copy · · · · · · · · · · Copy the selected section.
Cut · · · · · · · · · · · Cut the selected section.
Silence · · · · · · · · When one side of the stereo sound waveforms is selected,
Paste · · · · · · · · · Paste the cut/copied section in the position indicated by the slider.
Trim · · · · · · · · · · Leave only the selected section.
Undo · · · · · · · · · · Undo the previous operation.
Initialize · · · · · · · Return to the screen initially shown after opening the <Sound File
Register a noise waveform*
· · · · · · · · · · · · Register a selected range as noise.
Apply noise cancellation*
· · · · · · · · · · · · Decrease the volume of the noise you registered.
* These features are not available in Standard Edition.
Zoom in Time Axis
Zoom out Time Axis
Zoom in sound level
Zoom out sound level
Fit · · · · · · · · · · · · Shows time axis and sound level so they fit inside the screen.
Amp + · · · · · · · · · Sound waveforms in the selected section are increased and the sound
Amp - · · · · · · · · · Sound waveforms in the selected section are decreased and the sound
When stereo sound files are selected, the following buttons appear on the left of the <Sound File
Waveforms> screen.
Left channel · · · · The left channel waveforms can be edited.
Right channel· · · · The right channel waveforms can be edited.
change to
. No sound will be then output from the selected sound
waveform.
Waveforms> screen.
level rises.
level drops.
49
will
Hide quick links:
Advertisement
Table of Contents
