Play Audio From A Bluetooth Device; Make A Call - Philips CE152G User Manual

Disconnect a device
1
Press and hold
menu.
2
Press / repeatedly until
[DIS--CON] is displayed.
3
Press .
» [WAIT] is displayed with -, --,
and --- blinking alternately until
[DISCONNECTED] scrolls.
Tip
•
You can also complete the disconnection on your
device.
Reconnect a device
Some Bluetooth devices support the automatic
reconnection with a paired Bluetooth device.
If your device does not support automatic
reconnection, reconnect it with this system
manually.
1
Press and hold
menu.
2
Press / repeatedly until [RE--CON]
is displayed.
3
Press .
» [WAIT] is displayed with -, --,
and --- blinking alternately until
[CONNECTED] scrolls or [FAILED]
appears.
» If [CONNECTED] scrolls, this system
is reconnected to the last connected
device.
Tip
•
You can also complete the reconnection on your
device.
EN
18
to access the system
to access the system
Play audio from a Bluetooth
device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to tracks that are stored on the
device through the system. If the device also
supports Audio Video Remote Control Profile
(AVRCP) profile, you can control play on the
system or with its remote control.
1
Play a track on the connected device.
2
Press AS/SOURCE repeatedly to switch
the source to [BT AUDIO].
» Play starts automatically.
• To pause or resume play, press
• To skip to the previous or next track,
/
press
Note
•
If the connected device does not support the AVRCP
profile, control play on the connected device.

Make a call

Note
•
Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
Redial the last called number
1
Press .
» [REDIAL] is displayed.
2
Press to confirm.
» [CALLING] is displayed.
.
.