Play Audio Via Bluetooth; Switch To Bluetooth Mode; Connect A Device; Disconnect A Device - Philips ORT2300 User Manual

8 Play audio via
Bluetooth
With this product, you can stream audio from a
Bluetooth player.
An application Philips DigitalRadio is available
on Apple App Store and Google Play. To fully
enjoy features of this product, download and
install the application to your smart device.
Note
•
Philips does not guarantee the compatibility with all
Bluetooth devices.
•
Before pairing a device with this system, read its user
manual for Bluetooth compatibility.
•
The product can memorize a maximum of 4 paired
devices.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this system and a
Bluetooth device is approximately 10 meters (30 feet).
•
Any obstacle between this system and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.

Switch to Bluetooth mode

Press SOURCE repeatedly until [Bluetooth
Mode] is displayed.
» If no Bluetooth device is connected,
[Bluetooth No Connection] (No
Bluetooth connection) scrolls.

Connect a device

1
On your device, search for Bluetooth
devices.
2
In the device list, select ORT2300.
• If a message prompts for the
permission for Bluetooth connection
with ORT2300, confirm it.
» If the connection succeeds, [BT
Connected] is displayed on the LCD
display of this product.
Bluetooth indicator
The LED indicator beside the power and
volume knob indicates the status of Bluetooth
connection.
Indicator Bluetooth connection
Off Waiting for connection
Blinking Connecting
Solid Connected

Disconnect a device

• On this product, press and hold
for 3 seconds.
• On your device, break the Bluetooth
connection with this product.

Reconnect a device

• For a paired Bluetooth device on which
the automatic reconnection is enabled,
this product reconnects with it once it is
detected.
• For a paired Bluetooth device that does
not support the automatic reconnection,
reconnect it with this product manually.
EN
15