Sealed Surface Burners And Cooktop - KitchenAid KGCT365E Use & Care Manual

Sealed surface burners and cooktop
Cleaning the surface burners
• You should routinely remove and clean the burner
caps. Always clean the burner caps after a
spillover. Keeping the burner caps clean prevents
improper ignition and an uneven flame.
• For the proper flow of gas and ignition of the
burner, DO NOT ALLOW SPILLS, FOOD, CLEAN-
ING AGENTS, OR ANY OTHER MATERIAL TO
ENTER THE GAS TUBE OPENING.
• Gas must flow freely through the gas tube
opening for the burner to light properly. You must
keep this area free of any soil and protect it from
boilovers or spillovers. ALWAYS keep the burner
cap in place whenever a surface burner is in use.
• Let the cooktop cool before cleaning.
• Do not use oven cleaners, bleach, or rust
removers.
• Do not obstruct the flow of combustion and
ventilation air.
• If the knobs are removed while cleaning, be careful
not to spill liquids through the holes in the control
area.
• Be careful not to allow moisture to collect in the
control area. Moisture can cause the ignitor
switches to fail.
Cast-iron
b
Ignitor
Gas tube
opening
Burner
base
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
• Occasionally check the burner flames for proper
, size and shape as
v v v v
II
[
shown. A good flame
is blue in color. If the
flames are uneven, you
may need to clean the
burners.