Jensen NVX430BT User Manual
Jensen NVX430BT User Manual

Jensen NVX430BT User Manual

In-car navigator
Table of Contents

Advertisement

Quick Links

User Manual
GPS navigation
software for Audiovox
NVX430BT
English
Owners
manual :128-8226
VER • 00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVX430BT and is the answer not in the manual?

Questions and answers

Summary of Contents for Jensen NVX430BT

  • Page 1 User Manual GPS navigation software for Audiovox NVX430BT English Owners manual :128-8226 VER • 00...
  • Page 2 Copyright note Audiovox Electronics Corp. 150 Marcus Blvd., Hauppauge, NY 11788 Call center: 800 290 6650 The product and the information contained herein may be changed at any time without prior notification. This manual or any parts of it may not be reproduced, transmitted in any form either electronically...
  • Page 3 Thank you for choosing the NVX430BT Navigator as your door-to-door in-car navigator. The memory card version is very easy to use. Read the Quick Start Guide first and start using The NVX430BT Navigator right away. This document is the detailed description of the software. Although The NVX430BT Navigator can easily be discovered by experience, it is still recommended that you read through this manual to clearly understand the exact function of each button and icon.
  • Page 4: Table Of Contents

    Table of contents 1 ..Warnings and safety information 2 ..General information 3 ..Operating The NVX430BT Navigator (Controls) Hardware buttons ..............Screen buttons and controls ..........3.2.1 Direct selectors .................. 3.2.2 List selectors ..................3.2.3 Sliders ....................3.2.4 Switches ..................... 3.2.5 Special switches .................
  • Page 5 4.4.10.3 The active leg of the route ............4.4.10.4 Inactive legs of the route .............. 4.4.10.5 Roads in the route excluded by your preferences ......Screens with map ..............4.5.1 Turn preview (No. 1) ................4.5.2 Zoom in and out (No. 2 & 3) ............... 4.5.3 Tilt up and down (No.
  • Page 6 5 ..Settings General settings ............... 5.1.1 Safety Mode ..................5.1.2 Set Favorite Destinations ..............5.1.3 Automatic Night Colors ..............5.1.4 Warn When Speeding ................ 5.1.4.1 Speeding tolerance ..............5.1.4.2 Alternative speed limit ..............5.1.4.3 Alternative speeding tolerance ............ 5.1.5 Off-route Recalculation ..............
  • Page 7 .1.4 Coordinate display format ............1.5 Cockpit layout ................5.6.2 Backlight settings ................2.1 Power management ..............2.2 Brightness ................... 5.6.3 Smart Zoom ..................3.1 Smart Zoom settings ..............3.2 Enable Overview mode ..............3.3 Restore Lock-to-Position and Smart Zoom ......... 5.6.4 Route options ..................
  • Page 8: Warnings And Safety Information

    Warnings and safety information The NVX430BT Navigator is a navigation system that helps you find your way to your selected destination. It will determine your exact location with the help of an attached GPS device. The position information obtained from the GPS receiver will not be transmitted anywhere,...
  • Page 9: General Information

    General information To Enter a Destination address refer to item 6 (Find) in this manual for detailed instruction The NVX430BT Navigator is a navigation system optimized for in-car use. It provides door-to-door navigation for both single and multi-point routes using adaptable route parameters.
  • Page 10: Operating

    Operating The NVX430BT Navigator (Controls) The NVX430BT Navigator is designed for easy operation. All controls are operable by fingertips, or Stylus. Wherever possible, pushbuttons and lists are provided make accessing functions or changing settings as easy as possible. 3.1 Hardware buttons Hardware buttons are mostly used on map screens...
  • Page 11 Back View (2) Loudspeaker - Playback language statements and warnings. © (3) Stylus - Take the Stylus out of its compartment in order to use it, and © replace it after use. The Stulys is for operating the touch screen. Top / Bottom View BOTTOM VIEW...
  • Page 12: Screen Buttons And Controls

    Left / Right View (8) SD/MMC slot - Accepts an optional SD (Secure Digital) or MMC (Multi Media Card) Card for removable storage. (9) Headphone Interface (3.5ram) - Connects to a pair of stereo headphones. (10) DC Adaptor Port - Connection to external power supply Vehical or AC adapter (5VDC, 2A).
  • Page 13: Direct Selectors

    Screens and controls The primary input channel of The NVX430BT Navigator is the touch screen. If you read on, you will realize that most parts of the screen are not only used to display information but also to initiate functions by tapping. Below you will find a list of the most frequently used controls in the program.
  • Page 14: Switches

    If the value limits are not displayed at the ends of the slider, the leftmost position means the minimum value, while the rightmost position represents the maximum value. This control can be operated in two ways. Either drag the handle to move the slider to its new position, or tap the slider where you want the handle to appear (the thumb jumps there immediately).
  • Page 15: Switches In The Quick Menu

    3.1.6 Switches in the Quick menu The switches of the Quick menu (4.7.2) behave as normal switches but they look different in order to fit in with the other menu buttons. Tap the button to toggle between the enabled and disabled states.
  • Page 16: Qwerty-Type Keyboards

    ::[:[C..&i::_: ..t_ ..If you used computer keyboards, consider trying of the QWERTY-type keypads. 3.1.7.2 QWERTY-type keyboards QWERTY-type keyboards have both letters and numbers on them. Their layout is the same as of the standard QWERTY and AZERTY (French) keyboards.
  • Page 17: Discovering

    Although QWERTY-type keyboards also contain number keys, when entering a house number, the program offers the more convenient numeric keypad. Discovering the program through the screens The best way to discover The NVX430BT Navigator is to explore each screen detail, and to find out how to move from one to another. Read this chapter for a guided tour.
  • Page 18: About Screen

    Button to open Map screen Button to open About screen * Depends on program settings ** Same as removing the SD card 4.2 About screen Tap About on the Main menu screen to open this screen. The About screen is not used in no It is here to inform you about...
  • Page 19: Gps Connection Indicator

    To identify satellites use their numbers also shown in the virtual sky. The more satellites your GPS tracks (the green ones), the better your calculated position will Additional pieces of information on this screen are: current position in latitude/longitude format, elevation, speed, date, time and calculated accuracy. Note: Accuracy can be affected by several factors the GPS cannot take into account.
  • Page 20: Time Synchronization

    - Yellow means 2D reception. A GPS position has been acquired, The NVX225 Navigator is ready for navigation, but the GPS is using enough satellites for calculating the horizontal position only. Elevation data is not provided, and the position error may be significant. - Green means 3D reception.
  • Page 21: And 3D Map Views

    display is common. The elements of the map are described here. For the controls and special functions of the two map screens see 4.5. The current version of The NVX430BT Navigator is primarily intended for land navigation. That is why maps in The NVX430BT Navigator look similar to paper roadmaps (when using daytime colors and 2D map mode).
  • Page 22: Daylight And Night Color Schemes

    Note: If you need to zoom out briefly to locate your position on the map, use the Overview mode instead of zooming out and back in. The Overview mode is a 2D North-up view that can be started by tapping the compass button on the right (see...
  • Page 23: Streets And Roads

    4.4.4 Streets and roads The similarity of The NVX430BT Navigator to paper roadmaps is also convenient when it comes to streets, the most important elements of the map concerning navigation. NVX430BT Navigator uses similar color codes to those you are accustomed to, and the width of the streets also refers to their importance,...
  • Page 24: Current Position And Lock-On-Road

    Tip: These objects are normally displayed using textured polygons that look natural to the eye. Should you have a slow PND, you may wish to switch the textured display off (5.2.5) to free some of the resources of your PND by replacing textures with plain colored surfaces.
  • Page 25: Marked Map Points (Pin)

    timeout The NVX430BT Navigator restores Lock-to-Position (5.6.3.3), and the Cursor jumps back to the current GPS position. 4.4.8 Marked map points (Pin) The Cursor can be marked with a pin. Pins are shown as being stuck in the map. A pin is visible at all zoom levels and remains in its position until you unpin it, or delete all pins in advanced...
  • Page 26: Elements Of The Active Route

    Tip: Tap the map on or near a POI item to see the list of the names of the nearest POIs in a popup list, if it is enabled (4.7.2.5). To see the details of a particular POI in the list, tap the blue T icon on the right. If you have too may POIs nearby, this list may not be complete.
  • Page 27: Roads In The Route Excluded By Your Preferences

    4.4.10.5 Roads in the route excluded by your preferences Although you can choose whether to include or avoid some road types in Route parameter settings (5.4.4), sometimes they are impossible to avoid near the starting point, via points or the destination. If so, The NVX430BT Navigator will display those...
  • Page 28: Turn Preview (No. 1)

    Control Display (Cockpit only) Turn preview* Opens Route menu* Zooms in (optional) Zooms out (optional) Tilts down (optional) Tilts up (optional) Re-enables Lock-to-Position / Smart Zoom Indicates that Lock to GPS position and heading is inactive Selected map point (Cursor) Opens Popup Info and Cursor menu (Map only) Map scale Zooms in/out by dragging...
  • Page 29: Zoom In And Out (No. 2 & 3)

    This field also serves as a button. Tap it to get to the Route menu (4.7.3). The Map screen will show a button called Route here if there is an active route. This also leads to the Route menu. 4.5.2 Zoom in and out (No.
  • Page 30: Lock To Gps Position And Heading (No. 6)

    longer tilt the map by itself (automatic zooming and rotating remains active). You need to press Enter (3.1), or tap the Lock button (4.5.4) to return the tilt control to Smart Zoom. You can also set The NVX430BT Navigator to do this automatically after a few seconds (5.6.3.3).
  • Page 31: Map Scale (No. 8)

    4.5.6 Map scale (No. 8) The scale indicator is only available on the Map screen. In 2D map view it represents the scale of the map. In 3D view it is the scale of the nearest part of the map only. You can use it in both 2D and 3D modes to scale the map.
  • Page 32: Gps Position Quality (No. 11)

    the fixed zoom level of Overview in Advanced settings (5.6.3.2). An airplane icon indicates Overview mode. Tap the icon again to return to Track-up (automatic rotation) mode. 4.5.9 GPS position quality (No. 11) Similarly to the icon found on the GPS Data screen (4.3.3), the map screens also...
  • Page 33: Sound Muting (No. 13)

    4.5.11 Sound muting (No. 13) By tapping this button you can quickly mute all sounds of the PND. This will not modify the volume level and the enabled or disabled status of the voice guidance the key sounds (all to be set on the Sound Settings screen: 5.3), just mutes the...
  • Page 34 reappear by reopening the Cursor menu using the arrow in the bottom right corner. When you open the menu manually, it will stay on until you close it or switch to another screen. Tip: If you want to see the map around the Cursor, close the Cursor...
  • Page 35: Current Street (No. 16)

    Unpin: remove the pin near or at the Cursor. This menu point replaces and is available only if the selected point is near or at a pin. Add POI" opens the new POI capture window to let you add the selected point to the list of your user points.
  • Page 36: Distance To Next Turn (No. 18)

    4.5.16 Distance to next turn (No. 18) This field shows the distance to go before reaching the next route event (turn, roundabout, exit, etc.) This field is only displayed when navigating a route. 4.5.17 Next street / Next settlement (No. 19) This field shows the road or street that comes next in the route itinerary.
  • Page 37: Route Data Displayed (For Destination And Via Points)

    4.6.1 Route data displayed (for destination and via points) In the top section of the screen you see information about the current route. These fields are continuously updated while you keep this screen open. When you open the screen, all fields contain information on reaching...
  • Page 38: Time Left

    4.6.1.4 Time Left This is an estimated value that can also be displayed in one of the Route data fields on the Cockpit screen as 'Time to destination'. It shows the time needed to reach the final destination of the route based on information available...
  • Page 39: Fit To Screen

    • - This icon shows that toll roads are included in the recommended route. • This icon shows that you need to board a ferry along the recommended route. • - This icon shows that you need to pay for the ferry. - This icon is displayed when The NVX430BT Navigator could not plan a route with all your road type preferences respected.
  • Page 40: Parameters

    4.6.4 Parameters This button opens the Route parameter settings screen (5.4) otherwise opened from the Route menu (4.7.3). 4.7 Menu The Menu button can be found in the top right corner of the portrait and square map screens and in the bottom left corner of the landscape map screens.
  • Page 41: Zoom & Tilt

    4.7.2.2 Zoom & Tilt When the green light is on, additional transparent buttons (4.5.2 and 4.5.3) appear on the left side of the map screens for zooming and tilting without the use of hardware buttons. 4.7.2.3 Night Mode Turn on or off the night colors to override the automatic color scheme switching.
  • Page 42 If you highlight any of the POI groups by tapping them, the button in the bottom left corner will become Show if the POI group is hidden, or Hide if the group is shown or partly shown. Tip: To make a partly shown group fully shown, tap this button twice.
  • Page 43 Show/Hide: similarly to built-in POIs, you have the possibility to show or hide all POIs of the selected category on the map. Groups with a blue icon are displayed; groups with a grey icon are hidden. New: you can create a new My POI group by tapping this button. You need to select an icon, a name, and the maximum zoom level at which the POI is still visible on the map (provided...
  • Page 44: Popup Info

    Delete: you can delete any of your previously saved POIs. The NVX430BT Navigator will ask you to confirm this action. Edit: you can edit the attributes (name, icon and group) of a previously created POI. • OK:: if you tap this button, the map screen returns with the selected POI in the middle.
  • Page 45 Each track log has a color, shown to the left of its name when the track log is visible on the map. If the track is not visible, an underscore character is shown here. Tapping the line of the highlighted track log will toggle between showing and hiding that log.
  • Page 46 Replay: push this button to see a simulation of the saved track log on the map. A green icon (4.5.12) will appear on the map screens to let you know it is not a fly over but a simulation based on a real saved log. Delete: you can delete a track log if it is not needed any more.
  • Page 47: Route Tab

    4.7.3 Route tab This menu contains options to manage different settings in the program. 4.7.3.1 Recalculate This menu point is only available if an active route exists and GPS position present. It brings up a menu with four options. Using one of these functions you can modify the current route.
  • Page 48: Delete

    The NVX430BT Navigator still keeps on navigating towards that point. When there are no via points left (only the destination), the name of this button turns to Delete Route, and it cancels the navigation. Bypass When you run into a traffic jam or roadblock, you may want to have The NVX430BT Navigator calculate...
  • Page 49: Itinerary

    Note: When a POI item is used as a route waypoint, deleting the route will not delete the POI item itself, just its role in the route. 4.7.3.3 Itinerary This function opens the itinerary (route event list) of the active route. The Itinerary has three different display modes and two functions.
  • Page 50: Fly Over

    recalculate the route excluding that turn. If the next street is important in the route, it is likely that The NVX430BT Navigator will replace the turn with several easier ones to get to the same street. Road: when you exclude a road, The NVX430BT Navigator will calculate...
  • Page 51: Info

    you open the list during navigation, or the point where The NVX430BT Navigator most recently recalculated the route. This means the list is permanently updated, and via points drop out during the journey. The last item in the list is your final destination. Use the arrows on the right to browse through the list and tap any line to highlight it.
  • Page 52: Main Button

    4.7.4 Main button The Main button at the bottom right corner leads to the Main menu screen described in 4.1. Settings The NVX430BT Navigator provides several settings in order to let you customize functions of the program. The Settings screen can be accessed directly from the...
  • Page 53: Set Favorite Destinations

    When you disable Safety Mode, The NVX430BT Navigator will warn you. 5.1.2 Set Favorite Destinations You can select two of your most frequent destinations to be your favorites (6.2.5). You can start navigating to either of them by only two taps on the screen. original names of these points are Home and Work.
  • Page 54: Speeding Tolerance

    fully correct for all roads in the map. This setting lets you decide whether you want to receive the warnings or not. If you turn on this switch, The NVX430BT Navigator will open a new screen to let you customize the parameters used by the speed warning. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You can set two different kinds of behavior...
  • Page 55: Off-Route Recalculation

    100 km/h 105 km/h (=100 km/h + 5%) 120 km/h 126 km/h (=120 km/h + 5%) 160 km/h 168 km/h (=160 km/h + 5%) 5.1.5 Off-route Recalculation Once a route is planned, this setting will tell The NVX430BT Navigator what to do when you deviate from that route.
  • Page 56: Disabled

    5.1.5.3 Disabled If you stick to the original route, and you wish to get back to it on your own, you can disable recalculation. This guidance will stop until return recommended route. 5.2 Map settings You can set a few parameters determining the appearance of the maps...
  • Page 57: Show Street Labels

    5.2.4 Show Street Labels You can set whether or not to see the names of the streets and the POI icons on the map when driving. Based on the current zoom and tilt levels, street names displayed either aligned with the street or on signposts stuck into the streets (4.4.4).
  • Page 58: Voice Guidance Volume/Switch

    5.3.2 Voice guidance volume/switch The switch on the left can turn on or mute NVX430BT Navigator's audible guidance. When turned on, the slider on the right will adjust the loudness of voice prompts. In its leftmost position the voice guidance is suppressed, in its rightmost position the master volume...
  • Page 59: Route Parameter Settings

    5.4 Route parameter settings This is a very important page. Settings here determine how routes will be calculated. This screen is directly accessible from the Route Information screen (4.6). 5.4.1 Method Use the handle to set the speed of the route calculation. In the leftmost position route may not be optimal...
  • Page 60: Economical

    5.4.2.3 Economical This setting is a wise combination of the previous two. Although basically going for the fastest solution, if there is another route taking a bit more time but a lot less distance compared to the fastest one, The NVX430BT Navigator will choose this one instead to save fuel.
  • Page 61: Ferries

    5.4.4.3 Ferries The accessibility of temporary ferries is not necessarily included in the map data. Furthermore you may need to pay fare, so you may consider disabling them from the preset enabled status. 5.4.4.4 U-turns Although displayed amongst road types, this is a type of action. Most drivers prefer to replace them with a few normal left and/or right turns in the next few junctions, so it is disabled...
  • Page 62: Program Language

    5.5.1 Pro qram lanquaqe This button displays the current written language of the program. By tapping button you can select from a list of available languages. The NVX430BT Navigator will have to be restarted if you change this setting. The NVX430BT Navigator will ask for confirmation...
  • Page 63: Advanced Settings

    5.6 Advanced settings These screens let you set a large number of different advanced settings and initiate some special functions. These settings and functions are divided into six groups. Tap on any button to set the corresponding parameters. They all open new windows where you can make your desired changes.
  • Page 64: Zoom In After Find

    _ii_ii_H_;_i_J_ ¸,¸,¸,i iii_i_i_i_ii Note: you will still have the possibility to switch the map to 2D view or north-up orientation, but the map will return to 2D mode whenever Cockpit mode is started. 5.6.1.3 Zoom in after find When this switch is turned off, The NVX430BT Navigator will centre the map to the...
  • Page 65: Power Management

    5.6.2.1 Power management At the top of the screen you can set how the backlight will behave when the screen has not been touched for a while. Backliqht always on You can choose to have the lights always on. Smart power save You can also initiate this special feature of The NVX430BT...
  • Page 66: Smart Zoom Settings

    5.6.3.1 Smart Zoom settings You can set how close Smart Zoom can zoom in when approaching the next turn (Zoom-in limit), and the maximum zoom level to zoom out when the next turn is further away (Zoom-out limit). The default values are set to be optimal in most cases. 5.6.3.2 Enable Overview mode...
  • Page 67: Route Options

    Turn this switch on if you want The NVX430BT Navigator to return to your current GPS position after you have moved the map during navigation. This is useful if you have moved the map accidentally, or if you have moved it to quickly check something near your route.
  • Page 68: Off-Route Sensitivity And Recalculation Delay

    5.6.4.1 Off-route sensitivity and Recalculation delay Depending on the quality of your GPS device, the GPS antenna location in the car and the environment you are driving in, route recalculation can behave differently. The NVX430BT Navigator may think you have departed the proposed route and perform...
  • Page 69: User Data Management

    GPS errors. For pedestrian use you may consider disabling Lock-on-Road to make The NVX430BT Navigator always show your exact position. Note: By turning off Lock-on-Road you also turn off the GPS position error filtering. The position shown on the map will be subject to all position errors and position...
  • Page 70: Remove Pins

    By tapping this button you will lose all of the changes made since the time of the latest backup. The NVX430BT Navigator will warn you about this before overwriting the current database with the backup. 5.6.5.3 Remove Pins Normally pins can be deleted one by one. Since they are shown at all zoom levels, and you may end up having too many of them, this button lets you delete all of them together.
  • Page 71: Find & Go (Main Menu)

    6.1 Find & GO (Main menu) As just mentioned, the fastest way to find your destination and start navigating is to tap Find & GO in the Main Menu (4.1). This will put you on the Find screen, and as soon as you pick a destination, The NVX430BT Navigator...
  • Page 72: Find An Address, Street, Intersection Or City

    6.2.1 Find an Address, Street, Intersection or City Searching for a city, a street, an intersection, or an exact address can all be done in the Find Address module? If you know at least a part of the address, this is the quickest way to find the location.
  • Page 73 If you find that the list of recently used cities contains settlements you will not visit in the near future, you can choose to empty the list by the Clear button in the bottom left corner. Selectinq a new settlement to search If you are looking for a city or town (or state) you cannot find on the list, tap Other...
  • Page 74 splits the word. That is why you can search for 'Alleyn-Et-Cawood' with all the following search criteria: ',4 E C', 'ETA', or ',41Ca'. Tip: If you have finished entering the street name and the matching names are still on more than one page, just tap Done, and select your desired settlement from the list.
  • Page 75: Selecting A Street Or The Centre Of The Settlement

    Note: In Australia you can skip this part by tapping done before entering any letters. This way you can search for a street name in the whole state. In other countries this step is compulsory. If you press done before entering letters, the list...
  • Page 76: Selecting A House Number Or The Midpoint Of The Street

    Tip: If you are looking for an intersection, choose the street that has a rare or unusual name first. This way you need to enter fewer letters to get the list of results. You may also choose the shorter of the two streets first. This way it will be faster to choose the second one from the list of crossing streets after the first street has been selected.
  • Page 77: Find In History

    desired street name from the list of available intersections of the previously selected street (displayed in the top centre of the screen). The crossing of the two streets will be the selected point. ,_ka_mt_ utca 6.2.2 Find in History If you have used Find before, or saved map points as POIs, marked points with a pin, or picked and used points of the map before, they all appear in the History list.
  • Page 78: Find A Poi

    When you enter this page, the coordinates of the current position (or the selected map point (Cursor) if Lock-to-Position is inactive) are shown at the top of the display. The coordinates are always shown in the format configured in advanced settings Display options...
  • Page 79 confirm that it matches what you want. To change the reference, tap the Change ref. button in the top right corner. Once you tap the Change ref. button, you are presented with these choices: • Address: you can specify an address to be searched around, or a settlement to search in.
  • Page 80: Find One Of The Favorites (Home/Work)

    Search results are ordered by their distance from the given reference point (nearest first). Note: In the case of POI items that you have created, you can also see the results in alphabetical order. Push the button with the label ABC that appears between Filter and the page number.
  • Page 81: Bluetooth Phone Operation

    7. Bluetooth Phone Operation Tap the icon to enter the Bluetooth display menu as shown below. Where: Pair --Phone Keypad Call Record Attribute Pair Devices Last Dialed Call; tap to redial the last dialed call. 7.1 Pair Tap the pair icon;...
  • Page 82: Making An Outgoing Call

    Notes: When pairing, please make sure the distance between the device and the mobile phone is within the pairing range. After successful pairing, tapping will go unanswered. After successful pairing, if the Sleep/Wake up Button pressec to turn off the device, when the device is turned on again, the device will connect to the mobile phone automatically.
  • Page 83: Menu Operation

    7.2.1 Menu Operation Minimize the window Volume Volume down Call time Mute Transfer the call from the device to the mobile phone Hung up the call Tap to open the numeric keypad. The following display, can be used to input the extension or the numeric confirmation.
  • Page 84: Answering/Rejecting An Incoming Call

    AnswerinqlReiectin.q an Incominq Call 7.2.2 When there is an incoming call, the "lncomming Call" screen will be displayed: Answer the incoming call In talk mode. (The operation the same with outgoing call talk mode operation.) Rejecting the incoming call 7.2.3 Call Record will enter call record display: In the Bluetooth display menu, tapping...
  • Page 85: Pair Devices

    Tap the numeric icon 0,1~9 to input the pin code. to clear the wrong number. Tap ~ to confirm and return to the Attribute display, and the pin code you have set will be displayed in the Pin Code bar. Activate the check box if Bluetooth function is to remain enabled after the Bluetooth interface menu is closed.
  • Page 86 Notes: In navigation mode you can observe the following display: At anytime, tap icon to switch from any mode to the Bluetooth mode. In navigation mode, if there is an incoming call, the display will switch to the Incoming Call display: You can tap the _ to reject the incoming call.
  • Page 87: Multimedia

    Tapping will caII the number, and the outgoing caII display will appear. (Refer to the "Outgoing call" display above.) 8. Multimedia on the main menu to enter the Multimedia selection display; three items appear for selection: Photo, Video and Audio. 8.1 PHOTO icon in Multimedia menu to open the Photo folder with...
  • Page 88: Audio

    to scan the pictures in slide mode. In slide mode, tapping anywhere ont the screen will return to the normal display. 8.2 AUDIO The unit can play music or sound files with MP3/WMA9/MAV format. Tapping icon the unit will enter the corresponding folder automatically as followed:...
  • Page 89: Video

    VIDEO icon to enter video Scan mode, and the following screen will be displayed: Tap file icon to open the video file. When you open a video file, the adjacent screen will be displayed: Dragging the slide block _ can fast forward/reverse the playback.

Table of Contents