Tires; Deck; Dimensions; Torque Requirements - Exmark Turf Ranger TR23KC Operator's Manual

2.8 TIRES

Type
Size
Quantity
Tread
Ply Rating
Pressure
2.9 MOWER DECK
2.9.1 Model Numbers: FMD604 and FMD 524
2.9.1 Cutting Width: 60 in. (152.4 cm.)
2.9.2 Discharge: Right Side
2.9.3 Optional Mulch Kit and Bagger available.
2.9.4 Blade Size: 60" - (3 ea.) 20.50 in. (52.1 cm.)
2.9.5 Type of Drive: Electric clutch mounted on engine shaft. Blades driven by two
2.9.6 Adjustable anti-scalp rollers (6 ea.)
2.9.7 Cutting Height: Adjusts in 1/2" (1.3 cm) increments from 1 1/2" (3.8 cm) to 4
2.9.8 Deck Mounting: Full floating deck is attached to out-front support frame.
Removable for servicing. Can be raised by one-touch electro-mechanical ball
screw deck lift system for servicing and cleaning or to transfer weight to drive
wheels which aides in climbing hills.

2.10 DIMENSIONS

2.10.1 Overall Width:
Turf Ranger with FMD524
Turf Ranger with FMD604
2.10.2 Overall Length:
Turf Ranger with FMD524
Turf Ranger with FMD604
2.10.3 Curb Weight:
Turf Ranger with FMD524
Turf Ranger with FMD604
2.10.4 Overall Height: 44.0" (111.8)
2.10.5 Wheel Base (center of caster tire to center of drive tire): 50.5" (128.3 cm)
2.10.6 Tread Width (center to center of drive wheels): 39.75" (101 cm)

2.11 TORQUE REQUIREMENTS

Bolt Location
Cutter Housing Spindle Nut (secured with threadlocker) ...................140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt ...................................................................................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount ...............................................................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller (See Figure 7)
Type A – Whizlock Nut....................................................................40-45 ft-lbs. (54-61 N-m)
Type B – Hex Capscrew..................................................................50-55 ft-lbs. (68-75 N-m)
Type B – Nyloc Nut..........................................................................30-35 ft-lbs. (41-47 N-m)
Engine Mounting Bolts ..............................................................................25-30 ft-lbs. (34-41 N-m)
Wheel Lug Nuts......................................................................................90-95 ft-lbs. (122-129 N-m)
Wheel Hub Slotted Nut ..................................................................... minimum100 ft-lbs. (136 N-m)
Clutch Retaining Bolt (secured with threadlocker) ....................................55-60 ft-lbs. (68-76 N-m)
Rear
Pneumatic
18 x 7.50-8
1
Turfsaver
4
14 psi (97 kPa)
52 in. (132.1 cm.)
52" - (3 ea.) 18.00 in. (45.72 cm.)
belts with self tensioning idlers.
1/2" (11.5 cm).
without deck
49.9" (126.8 cm)
49.9" (126.8 cm)
without deck
70.2" (178.3 cm)
70.2" (178.3 cm)
931 lbs. (422 kg)
972 lbs. (441 kg)
- 11 -
Front Caster
Drive
(FMD Units)
Pneumatic Pneumatic
20 x 10.00-8
2
Turfmate
4
20 psi (138 kPa) 16 psi (110 kPa)
deflector up
53.4" (135.6 cm)
61.4" (156.0 cm)
with deck
112.4" (285.5 cm)
112.4" (285.5 cm)
Torque
11 x 4-5
2
Smooth
4
deflector down
64.2" (163.1 cm)
72.2" (183.4 cm)