Tires & Wheels; Cutting Deck; Dimensions - Exmark LAZER ZTM Operator's Manual

2.7.5 Hydraulic Filter: Replaceable cartridge type.
P/N 513211: 10 microns, 18 psi bypass (Summer use above 32 F)
P/N 523541: 40 microns, 18 psi bypass (Winter use below 32 F)
2.7.6 Speeds: 44" & 48" units: 0 - 8.1 mph (13.1 km/hr) forward.
2.7.7 Drive wheel release valves allow machine to be moved when the engine is not
running.
2.8 TIRES AND WHEELS
2.8.1 Tires:
Drive Tires
Front Caster Tires

2.9 CUTTING DECK

2.9.1 Cutting Width:
2.9.2 Discharge: Side (Optional Mulch or Bag)
2.9.3 Blade Size:
(3 ea.)
2.9.4 Blade Spindles: solid steel spindles with 1" I.D. bearings.
2.9.5 Deck Drive: Electric clutch mounted on vertical engine shaft. Blades are driven
by one "B" Section belt (w/self-tensioning idler) direct from the engine.
2.9.6 Deck: Full floating deck is attached to out-front support frame.
Maximum turf protection is provided by three anti-scalp rollers on 44" &
48" decks and five anti-scalp rollers on 52" decks.
Deck design allows for bagging, mulching or side discharge.
2.9.7 Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1 1/2" (3.8 cm) to 4.5" (11.4 cm.) in 1/4" (.64 cm.)
increments for Serial No.s 190,000 and higher and 1/2" (1.3 cm) increments for
Serial No.s 160,000 through 189,999.
The cutting height adjustment handle has a transport position and all
adjustments can be made while the operator remains seated.
2.9.8 Mulching Kit: Optional.

2.10 DIMENSIONS

2.10.1 Overall Width:
w/44" Deck
w/48" Deck
w/52" Deck
2.10.2 Overall Length: w/44" & 48" decks: 74.1 in. (188.2 cm)
2.10.3 Overall Height: w/44" & 48" decks: 40.0 in. (196.3 cm.)
0 - 4.2 mph (6.8 km/hr) reverse.
52" units: 0 – 9.5 mph (15.3 km/hr) forward.
0 – 4.9 mph (7.9 km/hr) reverse.
Size
23 x 9.5-12
13 x 5.00-6
44" deck
44 in.(111.8 cm)
44" deck
15.25 in. (38.7 cm) 16.25 in. (41.3 cm) 18.00 in. (45.7 cm)
Without deck
43.9 in. (111.5 cm)
45.9 in. (116.6 cm)
47.9 in. (121.7 cm)
w/52" deck: 77.31 in. (196.3 cm)
w/52" deck: 40.0 in. (101.6 cm)
- 10 -
Qty Tread
2 "Turfmaster"
2 Smooth
48" deck
47.24 in. (120.0 cm)
48" deck
Discharge chute up Discharge chute down
47.4 in. (120.3 cm)
50.3 in. (122.4 cm)
54.3 in. (139.2 cm)
Ply Inflation
4 13 psi (90 kPa)
4 13 psi (90 kPa)
52" deck
52 in. (132.1 cm)
52" deck
54.7 in. (138.9 cm)
58.1 in. (147.6 cm)
62.8 in. (159.5 cm)