Connecting The Ductwork; Air Deflector Installation; (Recirculating Accessories) - Electrolux RH30WC60GSB Use & Care Manual

Installing the hood
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Connecting the ductwork
• Install ductwork, making connections in the
direction of airflow as illustrated.
• Push duct over the exhaust outlet.
• Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
• Make the same connection in the wall or ceiling
vent exit.
Airflow
Air deflector installation
(Recirculating accessories)
• Assemble the air deflector with the duct cover
bracket with 4 assembly screws provided as
shown.
Duct tape
over seam
Ductwork
hood
over seam
Airflow
Measure from the bottom of the air deflector to
the bottom of the hood outlet, as shown.
Dimension to measure
• Cut the duct at the measured size.
• Uninstall the air deflector removing the 4
assembly screws.
• Slip the duct onto the bottom of the deflector.
• Place the assembled deflector and duct over the
exhaust outlet from the hood.
• Assemble the air deflector to the duct cover
bracket with 4 assembly screws provided as
shown.