Connecting The Ductwork; Air Deflector Installation (Recirculating Accessories) - Electrolux EI36PC60GS Installation, Use & Care Manual

Installing the hood
12 12 12
12 12

Connecting the ductwork

Connecting the ductwork Connecting the ductwork Connecting the ductwork Connecting the ductwork
• Install ductwork, making connections in the
direction of airflow as illustrated.
• Push duct over the exhaust outlet.
• Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
• Make the same connection in the wall or ceiling
vent exit.
Air deflector installation Air deflector installation Air deflector installation Air deflector installation Air deflector installation
(Recir (Recir (Recirculating accessories) culating accessories) culating accessories) culating accessories)
(Recir (Recir culating accessories)
• Assemble the air deflector with the duct cover
bracket with 4 assembly screws provided as
shown.
Airflow
Duct tape
over seam
• Measure from the bottom of the air deflector to
the bottom of the hood outlet, as shown.
• Cut the duct at the measured size.
• Uninstall the air deflector removing the 4
assembly screws.
• Slip the duct onto the bottom of the deflector.
• Place the assembled deflector and duct over the
exhaust outlet from the hood. Assemble the air
deflector with the duct cover bracket with 4
assembly screws provided as shown.
• Use duct tape to seal the deflector and at the
exhaust outlet from the hood.