Electrolux E30IC80ISS1 Use & Care Manual page 15

Setting
urface Controls
OPERATING THE COOKmNG ZONES (CONT'O}
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
IMPORTANT OPERATING NOTES:
o Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to
display an error code and turn OFF while cooking. Clean the spills or remove the objects
from the cooktop.
Be sure the cooktop vent openings are NOT blocked. If the vent openings are blocked, the
cooktop internal sensor may shut OFF the cooktop to avoid overheating the appliance.
• If the cookware or pan is moved from the center of any active Cooking Zone for any reason,
a sensor will detect the situation and the cookware will no longer heat. The affected Cooking
ZoneAIpha-Numeric display will flash the power level set for the Cooking Zone. The Cooking
Zone will remember the power level setting for up to 3 minutes before the Cooking Zone
will automatically shut OFF.
To Turn OFF the Cooking Zones:
1. Once cooking is complete, touch the 10IN. OFF key pad to turn the Cooking Zone OFF.
2. The corresponding Cooking Zone ON/OFF Indicator light located above the ON- OFF key
pad will turn OFF. A beep will sound and the chosen Cooking Zone power level display
will turn off. If no other Cooking Zones are active and no other key pads are touched the
entire cooktop will shut OFF automatically in 10 more seconds.
3. When any Cooking Zone is OFF, the corresponding Cooking Zone Alpha-Numeric display
may display HE if the Cooking Zone temperature is too HOT. The Alpha-Numeric display
will continue to display HEeven if the Cooktop is switched OFF. TheAIpha-Numeric display
will continue to display HE as long as the cooktop remains HOT.