Advertisement
ASSEMBLY
1
BAGGER SUPPORT ASSEMBLY
(See Figs. 1A & 1B)
.
Remove and discard the upper bolt on both sides of
the drawbar. Using the same holes, install the shoulder
bolts supplied and tighten securely.
REMOVE AND DISCARD
UPPER BOLTS AND INSTALL
SHOULDER BOLTS SUPPUED
DRAWBAR
FIG. 1A
2.
Align support assembly pin with hole in drawbar and
hang assembly over the shoulder bolts.
3.
Be sure supportassembly isseated properly and secure
with retainer spring supplied.
SHOULDER
BOLTS
SUPPORT
ASSEMBLY
RETAINER
SPRING
_./.
PIN
FIG. 1B
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting coverassembJy
to tractor.
1.
Position cover assembly on ground behind tractor as
shown.
2.
Liftand rotate cover to align cover breckets with support
assembly tubes.
3,
Slide cover assembly down onto the support tubes,
COVER
ASSEMBUI
..---:;:_ ..
//iT
L_\\_
SUPPORT
__
ASSEMBLY
FIG. 2
Advertisement
