Table of Contents
Advertisement
Sensor
odes
15
The sensor is a semi-conductor
device that detects
the vapor (moisture and humidity) emitted from the
food as it heats. The sensor adjusts the cooking
times
and power
level
for various
foods
and
quantities.
Using
Sensor
Modes:
1. After oven is plugged in, wait 2 minutes before
using Sensor Modes.
2. Be sure the exterior of the cooking
container
and the interior of the oven are dry. Wipe off any
moisture with a dry cloth or paper towel.
3. The oven works with foods at normal storage
temperature.
For example, popcorn would be at
room temperature.
4. Any Sensor
Modes
selection
can
be pro-
grammed
with More or less time adjustment.
See page 25.
5. More or less food than the quantity listed in the
chart should be cooked following the guidelines
in any microwave cookbook.
6. During the first part of any sensor cooking
or
reheating, food name will appear on the display.
Do not open the oven door or press STO P/CLEAR
during this part of the cycle. The measurement of
vapor will be interrupted.
If this occurs, an error
message will appear. To continue cooking, press
the STOP!CLEAR
pad and cook manually.
When the sensor detects the vapor emitted from
the food, remainder of cooking time will appear.
Door may be opened when remaining cooking
time appears
on the display. At this time, you
may stir or season food, as desired.
7_
if the sensor does not detect
vapor properly
when popping
popcorn,
the oven will turn off,
and the correct time of day wilt be displayed.
If
the sensor does not detect vapor properly when
cooking other foods, ERROR will be displayed.
Follow the instructions.
8. Check
food for temperature
after cooking,
if
additional
time is needed,
continue
to cook
manually.
9. Each food has a cooking hint. Press user pref
pad when the HELP indicator is lighted in the
display.
Covering
Foods:
Some foods cook better when covered,
Use the
cover recommended
in the food charts.
1. Casserole lid.
2_
Plastic wrap: Use plastic wrap recommended
for
microwave
cooking.
Cover dish ioosety; allow
approximately
1/2 inch to remain uncovered
to
allow steam to escape. Plastic wrap should not
touch food.
,
Wax paper: Cover dish completely;
fold excess
wrap under dish to secure. If dish is wider than
paper,
overlap
two pieces at least one inch
to cover.
Be careful when
removing any covering
to allow
steam to escape away from you.
Quick Sensor
You can cook or reheat many foods by pressing a
Quick Sensor pad (,fresh veggies,
frozen veggies,
popcorn,
baked
potato
and sensor
reheat) and
START. You don't need to calculate cooking time
or power level.
_, Suppose you want to cook 2 baked potatoes.
Step
Press baked potato
pad.
Press
baked
potato
NOTES
!. Quick Sensor can be programmed with More
or less time adjustment.
See page 25.
2. The final result will vary according to the food
condition
(e.g. initial temperature,
shape,
quality). Check food for temperature
after
heating. If additional time is needed, continue
to heat manually.
Advertisement
Table of Contents
