Automatic Temperature Control (Atc) - Kenmore 11020802990 Owner's Manual And Installation Instructions

AUTOMATIC TEMPERATURE
CONTROL (ATC)
ll'+r+J,+.-+[+,+++,., "[_ a[_ It"
ATC takes away the worry of
undissolved detergent and ensures
consistent cleaning results from
season to season with warm and
cold washes,
ATC electronically senses and maintains
a uniform water temperature by
regulating incoming hot and cold water.
• Even in cold wash, some
warm water is let into the
washer to maintain a
temperature minimum of _.e COLD
70°F (21°C). In very cold "_ cow 7v
water, detergent may not _"COLD
dissolve and clothes will
not be cleaned completely. • WAMIO0"
• Warm wash is regulated
at approximately 100OF
(38°C). ATC does net control the hot
wash water temperature.
• Warm rinse is regulated at
approximately 750F (24°C) for all warm
rinse settings. This may be a cooler
warm rinse than what you are used to,
but it saves energy and still gives you
proper rinsing and a load that is
comfortable to remove.
SPEEDS DESCRIPTIONS
This section illustrates and describes
the wash/spin speeds you can select
with the SPEEDS Control. Each speed
setting is designed for different types of
fabrics and soil levels.
EXTRA DELICATE
Use this speed setting for lingerie and
loosely knit items. Setting combines
extra+slow speed and intermittent agita-
tion for gentle soil removal and slow
spin speeds to reduce wrinkling.
NOTE: Some "Hand Wash" items,
particularly wool, naturally shrink when
washed either in the sink or in the
washer. Keep this in mind when you
purchase items labeled "Hand Wash."
Items that shrink should be dried flat.
Block these items by gently stretching to
original measurements.
DELICATE
Use this speed setting for washable
knits and permanent press fabrics.
Setting combines slow wpeed agitation
for gentle soil removal and slow spin-
speeds to reduce wrinkling.
REGULAR
Use this speed setting for normally
soiled cottons and linens. Setting
combines slow speed agitation and fast
spin speeds to shorten drying time.
HEAVY DUTY
Use this speed setting for sturdy or
heavily soiled loads. Setting combines
fast speed agitation and fast spin
speeds.
DEUCATE REGULAR
SLOW! SLOW • • SLOW / FAST
EXTRA DELICATE _
imTERmITTENT • • HEAVY DUTY
SLOW/SLOW gASTIgAST
25