Crosley CLCE500FW2 Operating Instructions Manual

LAUNDRY CENTER DRYER OPERATING INSTRUCTIONS
AUTOMATIC COOL
DOWN
LESS DRY
MORE DRY
COOL
DOWN -
t0
t00
20 o 40
3O
TIMED DRY
START
8(}
ie 7(} O
60
TEMPERATURE
WHITES/
KNITS/DEUCATES REGULAR
LOW HEAT_HJG R HEAT
Before Operating Your Laundry
Center
Read your laundry center Owner's Guide. It has
important safety and warranty information. It also has
many suggestions for obtaining the best drying results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONSin your laundry center Owner's Guide
before operating this appliance.
Operating Steps
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Temperature control
6. Turn cycle selector clockwise to desired setting.
7. Start dryer. Push the Push to Start button for 2
seconds, or turn Turn to Start knob to ON, hold for
2 seconds and release.
& A signal will sound when the cycle ends.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care labels.
The WHITES/REGULAR-HIGH HEA T and DELICA TEs-
LOWHEAT temperatu re settings may be used with any
cycle setting.
CooIDown setting tu mbles the load without heat. Use
Cool Down to freshen clothing, pillows or blankets, orto
dust draperies.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
the Cool Down setting only.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automaticallyturns off and the load continues to tumble
for 5-10 minutes. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Auto Dry Cycle
This cycle is best for regular and permanent press items
that can be tumble dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.
• Foritems requiring more drying time, set cycleselector
on MORE DRY.
• For items requiring less drying time, set cycle selector
on LESS DRY.
Time Dry Cyde
This cycle provides up to 100 minutes of drying time at
the temperature selection of your choice.
P/N 134808700 (0610)