Kenmore 233.57819890 Use & Care / Installation Manual page 11

Mesh filters installation
(for models: 57800, 57810, 57805, 57815, 57809 and 57819)
It is recommended to install side filters first and finish with
center one(s).
Install as follows:
1) Insert upper end of filter into the hood (filter tab side).
2) Raise lower end toward the inside of hood.
3) Position rear part of filter into channel and pull.
4) Using filter tabs, pull on the upper end of filter and slide it
under the front inner retaining piece.
HD0009
I
Replacement filters are available. [
Refer to page 12 for ordering information.
I
Baffle filters installation
(for models: 57820, 57830, 57840, 57825, 57835, 57845,
57829, 57839 and 57849 only)
_b AUTION: Remove protective plastic film covering
filters before installing them.
It is recommended to install side filters first and finish with
center one(s).
Install as follows:
Make sure the filters are positioned as shown thus allowing
the grease to reach the channel easily.
A verical arrow with the word AIR can be found on filter border;
make sure to install the filter with the arrow aiming toward the
inside of the hood. See illustrations beside.
m
m
e}
m
m
2
O
m
m
11 m