Advertisement
Available languages
Available languages
1. Hang hood from (4) Mountin_
(from parts bag).
Slide
hood towards
wall
until mounting
screws
are
engaged in narrow end of (4) _.
Tighten mounting
screws securely.
CAUTION:
Do not push on filter
or fan blade!
Pushing
on the filter or fan bmade may cause them
to interfere
with ether hood parts+
KEYHOLE
MOUNTING
(4)
SCREW
(4)
2. Connect 31A"x 10" Ductwork
to hood. Use Duct _e
to
make joints secure and air tight.
DUCTTAPE
3¼"x 10" DUCTWORK
3. Install a 75 W Maximum
Light Bulb. Purchase bulb locally.
Gently squeeze Liqnt Lens Le_
to remove and replace
lens.
CAUTION:
Bulbs may be hot! Refer to bulb pack+
aging for further
information.
4. Make sure fan blade turns freely. Turn on power at service
panel, and test for proper operation.
LIGHT LENS
LEGS
75 W MAXIMUM
LIGHT BULB
10
Advertisement
