Protecting The Cooktop - Kenmore 911.42675 Use & Care Manual

Protecting the Cooktop
• DO NOT slide cookware across
your cooktop.
• DO NOT use scouring powders
or metal cleaning pads on your
cooktop.
• DO NOT apply your cooktop
cleaning creme to the cooktop
surface if the surface is hot.
• READ the instruction label on the
cooktop cleaning creme bottle
before attempting to clean the
surface of your cooktop.
• AFTER cleaning the cooktop
surface, be sure to wipe off any
residue that may be left from the
creme with a dry paper towel.
• FOR MAJOR spills, turn the
surface control knob to OFF. Use a
dry paper towel to wipe up spill,
then use a razor scraper (held with
a pothotder) at a 45 ° angle against
the surface of the cooktop to
scrape remaining spill from the hot
cooking zone.
OPERATION
CAUTION: When the
surface controls are
turned off, the Hot
Surface indicator light
will remain lit until the cooktop
surface has cooled to
approximately 150°1. The glass
ceramic surface will retain heat
after the indicator light goes
out. Use caution until the
cooktop surface has had time
to cool
• DO NOT cook directly on the
surface of the glass.
• DO NOT use the cooktop as a
cutting board.
5