Matedal Needed; Basic Tools - Kenmore Power Miser 1533.31412 HA Owner's Manual

Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these material,
depending on your type of installation.
f.
INSTAI,I,ATION
KI'IL< ................
I
.;_ WATER HEATER ,......
INSTALLATION ........., ]? i
KIT WITH FLEXIBLE
CONNECTORS
FOR 3/4" (19.05 mm)
OR 1/2" (12.7 mm)
THREADED OR
COPPER PLUMBING
FLEXIBLE WATER HEATER GAS
CONNECTOR WITH FITTINGS
DRAIN PANS AVAILABLE IN 20" (508 ram)
DIAMETER FOR WATER HEATERS
HAVING A DIAMETER 18" (457 mm) OR
LESS, 24" (610mm) DIAMETER FOR
WATER HEATERS HAVING A DIAMETER
22" (559 mm) OR LESS AND AVAILABLE
IN 28" (711 mm) DIAMETER FOR WATER
HEATERS HAVING A DIAMETER 26"
(660 ram) OR LESS
WATER HEATER HEAT
TRAPS HELP REDUCE
HEAT LOSS DUE TO
THERMAL SIPHONING
EXPANSION TANKS FOR THERMAL EXPANSION
CON DITIONS AVAILABLE IN 2 GALLONS
(7.6 LITERS) AND 5 GALLONS (18.9 LITERS)
CAPACITY THROUGH LOCAL SEARS STORE OR
SERVICE CENTER
Basic Tools
You may or may not need all these tools, depending on your
type of installation. These tools can be purchased at your local
Sears Store.
Pipe Wrenches (2) 14" (356 ram) 1_r_
Screwdriver
Tin Snips
6' (1.82 m) Tape or Folding Ruler
Garden Hose
Drill
Pipe Dope or Teflon Tape DRILL
SLOT-HEAD SCREWDRIVER
:_ TIN SNIPS
PHILLIPS SCREWDRIVER
ROLL OF TEFLON
TAPE (USE ONLY ON
WATER HEATER
CONNECTIONS)
PIPE DOPE
(SQUEEZE TUBE)
USE FOR WATER AND GAS
CONNECTIONS
GARDEN HOSE 6 FOOT TAPE PIPE WRENCH
Additional Tools Needed
When Sweat Soldering
Tubing Cutters or Hacksaw
Propane Tank
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
PROPANE
TORCH
HACKSAW
ROLL OF
EMERY CLOTH
314" (19 ram) WIRE BRUSH
1/2" (13 mm) WIRE BRUSH
ROLL OF LEAD-FREE SOLDER
SOFT SOLDER FLUX