Front Frame Removal; Outer Case Removal - Amana AAC081SRB Service Manual

Disassembly Procedures
[ WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and
discharge capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures
require power to be connected. Ensure all ground wires are connected before certifying unit as repaired
and/or operational.
Front Frame Removal
To remove front frame:
1. Remove 2 screws securing front frame to air
conditioner chassis.
2. Pull front frame out and away from air conditioner.
Outer Case Removal
To remove outer case:
1. Remove 6 screws securing outer case to chassis.
2. Remove outer case by sliding chassis out of outer
case.
Screws
Screws
S crew
Screws
@2003
Maytag Appliances Company 16022380 Rev, 0 19