Frigidaire FGEF304DKFD Use & Care Manual page 19

SETTING QUICK PREHEAT
Use the quick preheat feature when using single rack
baking to quickly heat the oven to bake temperatures. Use
this feature only for standard baking. A reminder tone will
sound indicating when to place the food in the oven.
When the oven is finished preheating quick preheat will
become just like the bake feature and continue to bake
until cancelled.
To set the quick preheat with an oven temperature
of 375°F
1. Arrange the interior oven racks.
2. Press UPPER or LOWER to select oven.
3. Press QUICK PREHEAT."350"will appear in the display.
If a preheat of 350°F is needed, press START.
4. Press 3 7 5.
5. Press START. "PRE" will be displayed while the oven is
preheating.
While in preheat mode, the convection fan (lower oven
only) will be activated during the first rise of temperature
to allow the oven to reach its target temperature faster.
The Bake, Broil and Convection (lower oven only) elements
so CYcle for a better heat d!strib ution: ...................................................................................
SETTING BAKE
The BAKE pad controls normal baking. Ira rapid preheating
is preferred, refer to the QUICK PREHEAT feature for
instructions. The oven can be programmed to bake at any
temperature from 170°F to 550°1.
Baking Tips:
- Preheat your oven before using the bake mode.
During preheat, the bake, broil elements and the con-
vection fan and element (lower oven only) are used in
cycle to quickly heat the oven.
Use only one rack and center the pans as much as pos-
sible on rack 2 or 3.
If using two racks, place the oven racks in positions 2
and 4.
Allow 2" to 4" (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature to 375°F
1. Arrange the interior oven racks.
2. Press UPPER OVEN or LOWER OVEN to select oven.
3. Press BAKE, "350" will appear in the display. If a bake
of 350°F is needed, press START.
4. Press 3 7 5.
5. Press START. The actual temperature will be displayed.
A beep will sound once the oven temperature reaches
375°F and the display will show "375 °':
6. Place food in the oven.
Pressing CANCEL will stop the feature at any time.
To change the Bake Temperature
(example: changing from 375°F to 425°F)
1. Press UPPER OVEN or LOWER OVEN to select oven,
2. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to
425°F, press BAKE and "375" will appear in the
display.
3. Press 4 2 5. "BAKE" will continue to flash and
"425 °" will appear in the display.
4. Press START. The actual temperature will be
displayed.
During the first rise of temperature, the convection fan
(lower oven only) will be activated to allow the oven to
reach its target temperature faster. The Bake, Broil and
Convection (lower oven only) elements will also cycle for
a better heat distribution.