Refrigerant Pipe - Frigidaire FRS093LW11 Installation Manual

Indoor unit outline
5" ormore
from t he wall =
Refrigerant pipe
hole {left) Q2.56"
6"or more from
the ceiling Installation plate
/ ...........................................................................
(B)
5" or more
from the wall
Refrigerant pipe
hole (right) O 2.56"
Capacity > 12000 Btu's
Fixing the Installation Plate
1. Install the installation plate
horizontally over the structural
parts on the wall using the spaces
indicated on the plate, as shown
in the figures above.
2. In the case of tiled, concrete or
similar walls, create 0.2 inch
diameter holes. Place anchorage
supports for the appropriate
assembly screws.
3. Fix the installation plate to the
wall with eight A type screws.
4. At all times securing to the wall
studs is recommended.
Attention
Fit the Installation Plateand drill holes
in the wall according to the wall
structure and corresponding mounting
points on the installation plate
(Dimensionsare in "mm" unless
otherwise stated).
installation plate
© @ ®
Drilling the Hole
.
Determine the position of the
hole for the pipes using the
installation plate and drill the
pipe hole so that it is tilted slightly
downward.
2. Always use a pipe cover with an
opening when drilling.
Wall
I Indoor unit [ Outdoor unit]