Jenn-Air JDB-5 Use & Care Manual page 11

CYCLES
LI
Cycles
Choose the cycle that best describes your dishload by pressing the corresponding touchpad. (See page 2,
Operating Tips, for how to begin the cycle).
Heavy Wash Long cycle for heavy food soils. 132 2 washes/3 rinses
Medium cycle for average food
Normal Wash soils. ClearScan T"Turbidity 97-117 1-2 washesV1-2 rinses _
sensor is active with this cycle.
China/Crystal Short cycle for light food soils. 82 1 wash/2 rinses
Sensor Clean
(select models)
Designed to select the number
of water fills best suited for the
soil level of each load, ClearScan '°
Turbidity sensor is active with
this cycle,
94-128
1-2 washesV2-3 rinses _
Rinses dishes being held until 9 1 rinse
Rinse Only there is a full load.
Quick Wash or Quick cycle for light food soils. 38 1 wash/2 rinses
Insta Wash Does not include drying time.
(select models)
Number of fills will vary depending on the soil levelof each load.
Notes
• Depending on water temperature, there may be time added to the cycle to bring water up to temperature.
• Cycle times shown in the numerical display (select models) will increase or decrease, based on each load's soil
level, water temperature and selected options.
• Only the following certified cycles have been designed to meet NSF requirements (NSF/ANSI 184 Residential
Dishwasher) for sanitization: Sensor Clean (select models), Heavy Wash, Normal Wash and China/Crystal.
Cont.
10