Control Pad Features - Frigidaire FGB24S5ABF Use & Care Manual

Control pad features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each
feature and function follow later in this Use & Care Guide,
A
dear v
off
O
bakeo
broil timer cLock
on-off
O O
1. Bake pad--Use to select the bake cooking feature.
2. Broil pad--Use to select the broil cooking feature.
3. Timer on=off pad--Use to set or cancel the Timer.
The Timer does not start or stop cooking.
4. Clock pad--Use to set the time of day.
5. Clear off padmUse to cancel any oven feature
previously entered except the time of day and minute
timer.
6. Down arrow padmUsed along with the function pads
to select oven temperature, time of day and minute timer.
7. Up arrow pad=Used along with the function pads to
select oven temperature, time of day and minute timer.
To Set the Clock
When the appliance is first plugged in, or when the
power supply to the range has been interrupted, the
display will flash "12:00".
1. Press CLOCK pad.
2. Within 4 seconds, press and hold the UP or DOWN
ARROW pad until the correct time of day appears in
the display.
To Change the Temperature Display Mode
The electronic oven control temperature display mode
was factory preset to display (Fahrenheit) °F oven
temperatures. Note: Oven cooking temperatures may be
set from 170°F to 500°F (76°C to 260°C).
To change the Temperature Display Hode to °C
(Celsius) or from °C to °F (do not use Bake or Broil
while changing the Temperature Display Mode):
1. Press & hold the BROIL pad for 7 seconds until F
or C appears in the display. Note: At this time the
display will show the current Temperature Display
Node whether set for F or C.
2. Within 4 seconds, press the UP or DOWN ARROW
pad once to toggle between the °F (Fahrenheit) and
°C (Celsius).
3. To accept the change, wait 5 more seconds until the
oven control beeps once. To complete the change
skip step 4 below, OR;
4. If at any time during the process of changing the
Temperature Display Node (F or C) you decide the
change is not desired, press the CLEAR OFF pad before
the oven control beeps once to cancel the process.
5. The display will then return to the time of day with
any temperature display mode change you may have
requested.
To Set the Minute Timer
i. Press TIMER ONIOFF pad.
2. Press the UP ARROW pad to increase thetime
inone minuteincrements. Pressand holdthe UP
ARROW pad to increase thetime faster. The timer
can be set for any amount of time from 1 minute to
11 hours and 59 minutes.
Note: If you press the DOWN ARROW pad first,
the timer will advance to 11 hours and 59 minutes.
3. The display shows the timer count down in minutes
until one minute remains. Then the display will count
down in seconds.
4. When the set time has run out, the timer will sound a
3 seconds beep. 0:00 will appear in the display until
TIMER ON/OFF pad is pressed.
Note: Whilethe minutetimeriscounting down, the
":"will f lash. T he minutetimerdoes notstart or stop
cooking. Itservesas an extra timerinthe kitchen that
will beep when the settime has Funout.The minute
timercan be used aloneor duringany ofthe otheroven
functions. When the minutetimerisinuse withany other
function, the minutetimerwill be shown inthe display. To
view otherfunctions, pressthe pad forthatfunction.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the UP or DOWN ARROW pad to increase or
decrease the time.
To Cancel the Minute Timer before the set time
has run out: Press TIMER ON/OFF.