Advertisement
READ
THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyouroven, become familiar with
the various pad functions of the oven as described below.
BROIL PAD--
Used to
UP and DOWN ARROW PADS--
Used along
select the variable
broil
with the function
pads to select oven
function,
temperature,
time of day, clean time and minute
timer,
is in use.
,
to set the time of day.
PAD--
Used to set or
............
.....
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous
Bake
feature.
O
®
O Oven
SELF-CLEAN
PAD--
Used to select the
Self-Cleaning
cycle. A
2 or 3 hour Self-Clean
time may be selected.
OVEN, PREHEAT
& DOOR LOCKED LIGHTS* --The
"OVEN"
light
will glow each time the oven turns on to maintain
the set oven
temperature.
The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature
is reset higher than the
actual oven temperature.
The "DOOR
LOCKED"
light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
FEATURE INDICATOR
LIGHTS--
These light to show which feature
BAKE PAD--Used
to select the bake
function.
CLEAR/OFF
PAD--
Used
to clear any function
previously
entered
except the time of day
and minute timer. Press
CLEAR/OFF
to stop
cooking. Also the CLEAR/
OFF pad is used to
activate
oven door
lockout setting.
*Note: The OVEN indicat0r light on the electronic diSplay will tUrn ON and OFF When using the Bake feature and during
preheaL This isnormal and indicates that the oven is Cyclingt0 maintain the selected baking temperatu re. When the
preheat indicator light turns OFF, your 0yen is ready:
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
should
not be in a Bake or Clean mode):
1.
Press _.
"----"
appears in the display.
2.
Press and hold the /_,
until "HI" appears in the display.
3.
Press and hold _
until °F or °C appears in the display.
4.
Press the ,_
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
Advertisement
