Advertisement
important
Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn
customers of potential exposure to such substances.
Grounding type
wall receptacle
GROUNDING
INSTRUCTIONS
(electric ignition models only)
Do not,
under
any
circumstance,
cut,
remove,
or bypass
the grounding
prong,
Power supply cord
with 3=prong
grounding
plug
Seethe INSTALLATION
INSTRUCTIONS
packaged with this range
for complete
installation
and grounding
instructions,
Avoid fire hazard or electrical shock. Do not use
an adapter plug, an extension cord, or remove grounding
prong
from electrical power cord. Failure to followthis
warning can cause
serious injury, fire or death.
This
appliance
is equipped
with
a 3-prong
grounding
plug for your protection
against shock
hazard
and
should be plugged directly
into a properly grounded
receptacle.
DO NOT cut or remove the grounding prong from this plug.
For personal safety, the range must be properly grounded.
For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
If a 2-prong wall receptacle
is the only available outlet, it is the
personal responsibility
of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
Conversion
to Liquefied
Petroleum
Gas (or L.R Gas)
The natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.P.) Gas.
If L.P. conversion is needed, contact your local appliance
dealer for assistance. The L.P. Conversion Kit may be
obtained from your appliance dealer and should be installed
by a qualified service technician. Before installing the kit be
sure to follow the L.P. Installation Instructions carefully.
Personal injury or death from electrical
shock may occur if the range is not installed by a qualified
installer or electrician.
Any additions, changes or conversions
required in order for this appliance to satisfactorily meet the
application needs must be made by a qualified technician.
Advertisement
