Download Table of Contents Print this page

Cycle Settings - Frigidaire FASG7074LN0 Use & Care Manual

Hide thumbs Also See for FASG7074LN0:

Advertisement

Table of Contents
Cycle Settings
For best
results
Follow the fabric care label instructions
on items to be dried.
Appropriate drying Temperature, Dryness Level and
Options will automatically
be displayed for each cycle.
The settings can be changed before the cycle is started.
Drying Temperature
To change the preset temperature,
press the Temp
button to scroll to the desired setting.
To protect your fabrics, not all temperatures are available
with every cycle.
The temperature selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
SfAR;
To return to factory
)_lons
settings, press these
two buttons at the
same time and
.
.
hold until the signal
......
sounds.
To change the Temperature after the cycle starts, press
Pause, adjust the setting and press Start to resume the
cycle.
Sanitize
Recommended for durable fabrics and towels. Use this
selection to remove harmful bacteria from your clothingor
other items where sanitization is desired.
The Sanitize option has been certified by NSF
InternationaP,
an independent third=party testing and
certification organization dedicated to public health,
safety and environmental
protection.
NSF Protolcol P154
Sanitization
Performance of
Residential
Clothes Dryers
This option will kill 99.9% of bacteria with no carryover of
bacteria between loads. A higher temperatures is required.
Please check fabric care labels to prevent damage.
High
Recommended for most cotton fabrics.
Normal
Recommended for wrinkle free, easy care, lightweight
fabrics and bulky loads.
Low
Recommended for delicate fabrics.
Air Dry
This setting (no heat) should only be used with a
Timed
Dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like materials;
to refresh clothing, stuffed animal, pillows or blankets;
and to dust draperies.
Dry Level (Auto
Dry)
To change the preset level, press the Dry Level button
to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available
with every cycle. :If a Dry Level is not appropriate for the
cycle, it cannot be selected.
The Dry Level selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To return to factory
settings, press these
two buttons at the
same time and
hold until the signal
To change the Dry Level after the cycle starts, press
Pause, adjust the setting and press Start to resume
the cycle.
Select the Normal
dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over=dried at
the end of the cycle. To increase drying time for similar
loads in the future, select More. For loads requiring less
drying time, select Less.
Select Damp for items you wish to partially dry before
hanging or ironing.

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Frigidaire FASG7074LN0

Table of Contents